Nice man looks fun

 

Raff I can't see the vid. You think you can post it on youtube? thanks

 

Post up some slips

 

^^ Like I said, exactly the same time. 11.1 at 65 MPH. (different trans and no exhaust to keep in mind too man).

Got a phone call from Ricky today. I couldnt pass up this deal. So here is a teaser pic or two...(thinking of a set of 205 or 215 low low pro 16's--streched!)







Yea, a 7 and 8 set of starions for 175! Condition is an honest 7 outa 10. I spent all day with 600 grit on one front wheel. and Im almost finished with that grit.

P.S. Polishing wheels is the BIGGEST PITA imaginable! But they just come out soo nice...

I found out starions are RWD too boot.I thought they were K cars. Im a dumbarse. And the cyl head is a Mitzu copy of a 20R head. Dual chain and everything.

O and 15,000 views.........Im flattered.

 

the guy told me he has another set for 150, who said me?

 

lmfao yes the Starions are RWD beasts... lol I watched one break a driveshaft at the drags.

 

One wheel got done this weekend.

Looked like this...



They came out a little better with some elbow grease...





Full polish---600 grit.







I like how it turned out.

 

dang that looks good man.

 

pimp juice!
started off with dry 400 to get the clear and some paint off, then went wet 400, then went wet 800 then wet 1000 and lastly dry 1500, applied some Meguiar's and Mothers polish, and WHAM!

 

Nice!

Should of used paint stripper tho, to get the clear and center sections cleaned... Save you some elbow grease... Looks good anyhow!

 

Damn! that shet looks good, bout time you done something right. I need to make these shine just like yours. I cant believe I was actually gonna pay to have this done, now I can do it on the cheap
Mine


NOT MINE (what Im going for)

 

hey all of toyota forum members, just give a word of encouragement that this chum bucket of Raffaelli makes it safe over to Colorado, i havnt heard a word so i hope he gets there, Reason being, He took off to colorado yesterday mornin, i'm sure he's almost there, but yea...
my word: Hurry the FOCK UP CHUM!... tell us where your at or i keep Toby!...

 

Yea got to CO. Horrible gas mileage (17)ish. No problems tho

 

HAHAhaha, sucks to be you.... how much you spend on gas ninja hoe?

 

Toyota Minis Fan Page

<iframe src="http://www.facebook.com/plugins/like.php?href=http%3A%2F%2Fwww.facebook.com%2Fpages%2FToyota-Minis%2F181486731863956%3Fv%3Dwall&amp;layout=standard&amp;show_faces=true&amp;width=450&amp;action=like&amp;colorscheme=light&amp;height=80" scrolling="no" frameborder="0" style="border:none; overflow:hidden; width:450px; height:80px;" allowTransparency="true"></iframe>

 

Glad to hear you made it safely bro, don't forget not to eat the yellow snow!

 

Glad to hear you made it to my neck of the woods safely lol

 

Yep, hows gunnison?

 

Ok, I got back last night. Woohoo back in the good weather!

In gunnison I visited my old boss (the Performance Shop). He's the best carb guy Ive ever met and we messed with the holley for a little bit.

We replaced the power valve (my new HOLLEY PV was blown), with a different brand and a 3.5 rating (was 5.0)

Soo on the way back I got 26.5 MPGs!!! and no more bogging at all! On top of that, its burning better and needs to run that mid-grade to keep it from pinging. It runs good!

No problems otherwise. I racked up 2500 miles in under a week. Used about .75 of a qt in oil. I noticed I got either a rear main leaking and a oil pan leaking. Or just a leaking oil pan.

I drove it from ~50ft above sea level to almost 12 thousand. Im suprised it even ran...

And one more thing. Ricky has an LC catalouge, ( literally it will give you a chubby) and it says holley 500's need a 74 main jet with a 3.5 PV. Its right on.

Ill get some pics up sometime...

 

Good to here you made it back safely and that the truck is running good! Can't wait to see some pics bro!