Where did you order the from? Nice find.

 

Well they don't fit!!!! They are about a half inch short in both sides, and the bolt holes for the arm rests don't match up either.... I am so pissed. I have see this mod done on that white truck w charger rims...

 

i might be mistaken, but i think he has power 4runner panels, and if you try to put panels on from a four door 4runner they will be shorter, like you said a 1/2 inch.

the four door 4runner doors are shorter then our trucks doors

 

yup, CRAP!

 

That looks like a 4 door 4Runner door panel to me (89-90). A 2 door 4Runner passenger side door panel will have holes for 2 inner door handles - one for the front seat passenger, and one towards the back of the panel so someone in the rear seat can open the door

 

did some work on a spare Valve cover I had laying around not the best pictures, but its not finished either....

 

I really like shiny stuff. Didnt read everything related so I might be off track here but you looking for door panels from a 2 door runner??? I know were some are I just pulled the door handles from them 2 weeks ago. Nothing pretty but they are both there with arm rests.

 

I want the 4runner door panels in my truck. I bought some off ebay, but they don't fit.

 

Yah but do you need the 4 door or 2 door panels or would neither fit??? I know were a 2 door is here in town it still had both panels/armrests minus door handles cause i took those 2 weeks ago. Probably pick them up for like $20

 

The ones I bought were from a 4door according to ebay. So I would be interested in the 2 door set, but I would prefer to know for sure that these will work, ya know...

 

when u goint to put those rims on???????????

 

Little bit of an update!!! Got it tinted and a clear bra put on. Other then that I put on some NGK plug wires and a K&N filter in it, also did an oil change and have been working on the Valve Cover...

 

I would like to see the clear bra? Nice man its looking good

 

Here is the best pic I could get of the clear bra for you. Its 12" from the front of the hood and I also wrapped the sides of the fenders behind the side markers. In the picture there is a faint line half way across toward the top. That is the bra itself.

On a side note, I did a little bit more work on the VC today.

 

Looking good. How much for the clear bra? Also how dark of tint is that?

 

Man you need to hurry up and put those on. Or just give them to me. Ya how much for that bra and where did you order it from?

 

I bought the tint and the bra by the roll off ebay. Tint is Llumar fully metalized for 80% heat refraction, and the bra is 3m. Can't really legally say what the tint is at, lol.


Did anyone notice the shaving I did to the VC?

 

wow that valve cover looks sick. how di you do that? what materials did you use??

 

truck is pretty

 

sand paper, a griding wheel, and a lot of elbow grease. Thanks!