Used felt paper( roofing paper will work),the pattern was very close to the stock head liner removed! Used a panel board from Home Depot for the hard board,screwed in place with self tapping ,large head 3/4'' & 1'' screws.Trimmed in place as I went with a air grinder & zip cutter! This will so much better than the stock bow one! Will use the same fabric I use @ rear wall & doors. Carpet is same what new ,but have a few burns from welding ,may replace! Got from Performance Products, $140.Toyota wanted $800+, less money & way more yardage for my house carpet!
Had to pull the Griffin radiator out,goes back,leaking!! Stock one going back in until I get the other back!So made new fan brackets.
The color is now darker than I had it. Wanted closer to the dash color ,which will be re-shot also. Tomorrow I'll clear coat all that was shot! Stock radiator is same color now also!
All the paint is Omni,as is the clear. First time around was PPG,can only get in water base now! Had a can of the Pewter Gray already & wanted it darker so I'm adding black & white pearl to the mix. The red is Radiant Red Met. with extra gold pearl added.