Nice truck.I'm not really a bagged type of guy myself and Guam's roads aren't bagged friendly anyways but if I was that looks like one I could roll with.Love your dads 4x.There is a super cherry one down the road from me on 44 super swampers Bilsteins all around and like a 6" lift.SUPER CHERRY and it never moves.Just eats me to see it sitting there.BTW if you are going to run a 2wd front clip you will need to swap out those 4x front fenders.

 

Thanks man yeah my dads trucks been in the family since new its chery and old school to the max!! just no lift suspention is all stock..

but yeah if i wanted to swap the 2wd fronnt id have to change the core suport... the PO told me it has a 4 runner suport so this way all the lights bolt up right?? its soild and done right soo i will prolly leave it... however i could run 2wd fenders and corner lights to atleast satisfy my huge wheel arch issue but then id have the wide 4 runner bumper haning over id have to swap that to a 2wd unit.... idk i will have to wait to see what rims i scoop up and get my fitment where i want it see if i can do something with what i got... but from lurking around the forums its defently not what i really would want....

The ride is pretty damn good i dont have pressure gauges but i get it to where it feels good and the drive shafts not bumping the cab and it truly rides like a caddy.... however at the Psi needed to run the front it sits nose high.. 1 cuz the huge 20's and 2 cuz its all stock.... soo i am thinking a DJM droped lower arm will allow the bag to run at a stiff enough psi yet not lift the front of the truck into the nose bleed section?? questions comments input?

 

Im not too familiar with bags so can you explain the psi issue? What happens to the ride if you air it down to a respectable height?

 

well for one i cant really air down to much cuz the FRONT wheels will begin to rub the rear of the well.. 20's are too big for my taste.... if i had like 17's or even a 18 with the right tire i could prolly run no air without rubbing...... as for the ride theres a big diff in the psi you run effects your ride quality.. less air more bounce... more air stiffer ride till you pretty much are bouncing off the bumps in the road lol... however like i said when i set it to where its really plush no matter what on big freeway dips my drive shaft hits the tunnel support on the cab... i think it needs to be bumped a lil higher then it can drop down to myself.... plus i would like to replace the shocks with some qa1 adjustables i bet that would help running a lower psi but give a stiffer ride equal everything out.... but at any rate the way the front is i want it to sit way lower while aired up so i think the lower arms are really the way to go.... only one way to find out right???

 

So my awesome Girlfriend picked me up some clear corners and bumper lights I was missing for V-day



Bout to do the 1157 mod and swap over to all hi power LED lights

 

F@#K, I want a white truck badly.

 

I think only other color I'd rock is gun metal.... so to say my 4runner front end is growing on me I want to set my truck up something like this supper low and some wide rims so we will see how it looks eventually

Until then I day dream


That trucks fresh as f@#k IDC what anyone says

 

That truck is tube chassis and static dropped with independent suspension at all four corners, also sr20 powered if memory serves me correct.

 

Yeah I been following the build very close... and by similar I meant stance wise and wheels.. only thing Toyota on the "Engineered to Slide" build is the sheet metal... its mainly Nissan based as well

 

Soo didn't really think it threw.... trucks posted for a bit just sold my rims and ordered my new set





Wish I at least had some stocks to roll on... oh well time for some much needed bed bracing work

 

Lol "oops".

What wheels are you getting now?

 

Unsure what color. Gold or Gun metal.. he says 2 weeks till he's back in stock so I got some time to think....

Wasn't my first choice but at 550 for a set it will do for now and should fill my fenders nicely

 

ESM? what size are you going with? i like gold on white. if you want to be more suddle then go with gunmetal.

 

Nah these are some off brand.... Esm are nice but at about 900 a set

 

Links to these?

 

Very nice man!!! Love the ghia btw.... Looks wicked!!

 

The Ghia is my baby thanks....

I found the wheels in the orange county craigslist

http://orangecounty.craigslist.org/pts/3505741291.html

 

Kinda diggin on these now.... haha I can never make up my mind.... plus the 2 weeks before I can drive my truck sucks :-/

 

I'm liking those better plus easier to keep clean lol.

 

Those bbs reps are sick. I want a set.