will 2 in drop spindles and torsion bar turn to lower a little bit more cause for a crappy ride? My **** is dumped right now with torsion bars backed all the way out and no bump stop with 4in blocks in rear .(stock spindles)
Rides like **** of course

 

The drop spindle will just get you closer to Mother Earth with out messing with the torsions. You can do both, but you're still gonna have a crappy ride.

 

other than drop spindles what else could be done to lower front and keep a goo ride quality? with out touching torsion bars? they mak a 4in drop spindle?

 

you can do drop spindles lower control arms that give's you 5" of drop right there... idk if u can do ball join flip with the control arms if u can that would give about 6" of drop for the fount w/o cranking your bars down

 

so if i went with spindles and lower control arms with good shocks and torsion bars stock i will have a some what a smooth ride??
Also can bags be installed later on without having any issues if i were to go with aftermarket lower control arms?

 

i beeseen, can u use 18s on lowercontrol arms, and spindals ?

 

Are Chassis Tech drop spindles any good? I found some on ebay for $160.

 

I'm running them

they work great

 

Should I replace any bushings, front/rear, while I'm dropping it? If so, which ones?