truck lookin sick!
tacoma rear bumper ftw! haha

 

Did you touch your torsions to go lower or the control arms and spindle did all that damage?.....nice setup btw.

 

Right now the torsions I just tightened to about 3inches of thread after the top nut cause when I first had them at an 1 1/2" thread, the truck pretty much laid frame. The ride is waaaay better than before, close to stock actually, just the rear is kinda stiff cause of the new leafs and stiffer shocks.

 

Yups haha, eh you know where to re-drill to bring up the taco bumper for make em more flush to the bed? Looks kinda ugly just sitting in the stock location.

Pretty much yeah I guess, I brought them up close to stock torsion height and this is what I got.

 

Still get plenty clearance I guess, never really measured it though. And here's some pics of the truck with my Miesters on...

 

Now that's a thought hahaha, I was thinking of going 5" lift blocks but stacking the 3" blocks sounds better...And the slippers are temporary, I lost the bolts for my bump stops and now I gotta go buy new ones

 

Fakas cherry. I gotta slap some locals under mine mine wack make sked

 

Scotts work best

 

Haha yeah I found my old pair locals and uh ad slap um on is way better than wat was but still make noise. I'm planning to dearc my middle spring

 

Killer ride brah!!

 

So stacking lift blocks would help raise it up a little? Are those the blocks under the leafs in your pics?

 

ride looks nice. LCA and spindles do wonders. my torsions are indexed and cranked all the way up and i sit the same as you! ride quality is better then stock imo. looks good. you know one guy named ROMEL by any chance? (hawaiis illlest)

 

Can you tell me your rim size and tire size? Also just so I got this straight, you did a BJ flip, drop spindles, drop LCAs, drop springs, drop blocks, and drop shocks?

 

Yeah I know him

Raise the truck up or the rear end?

It's 18x9&10 and I did all of those except for the BJ flip.

 

the truck...

so how much ground clearence are you getting now since its all settled and done... i really want to do a 5/3 drop like u did... but im thinking it might be too low... maybe just 3/3 and take it from there... yeah so hows ground clearence all around witht he truck now?

 

Actually I'm at a 5/7 drop but yeah haha, right now with my S-Runners my frame's a little less than 4 inches off the ground. My truck still too high though...

 

5/7?!?!? Niiiice... So the frame is approx 4" from the ground all around?? Even the front?? Wow..

 

+30 all around

 

Gonna change the look of the truck a bit....Won't be posting pics till mid-April though since I'll be going on a trip.