78hilux's Build Thread

Discussion in '1976-1983 Build-Up/Project Threads' started by 78hilux, Apr 10, 2014.

  1. 78hilux

    78hilux Member

    Joined:
    Mar 6, 2014
    Messages:
    30
    Likes Received:
    0
    Location:
    Des Moines
    Truck:
    78 hilux 2wd
    Found the right one at autozone. Part # is 8188 or 8818.. anyways shes in and here is how the sending unit was bypassed.
    [​IMG]
    [​IMG]
     
  2. 93_Toy_Mini

    93_Toy_Mini Addict

    Joined:
    Jan 5, 2012
    Messages:
    597
    Likes Received:
    2
    Location:
    Gardnerville, NV
    Truck:
    93 Reg Cab Pickup
    Great truck, anything new on this?
     
  3. Zwiese

    Zwiese Newbie

    Joined:
    Apr 12, 2015
    Messages:
    3
    Likes Received:
    0
    Ok so I'm the owner of this truck now. I've had it for almost a year now and am finally giving it some love so I can daily drive it. When I got it from 78hilux lots of the engine gaskets where leaking so I got the full gasket set and did a headgasket and head overhaul. Also switched to the weber 32/36 carb, egr delete and electric fan. Before and after pics of the bay. The radiator I used is from an 82 corolla I had it already so I made the hoses work!
     

    Attached Files:

  4. Zwiese

    Zwiese Newbie

    Joined:
    Apr 12, 2015
    Messages:
    3
    Likes Received:
    0
    Tttt
     

    Attached Files:

  5. Zwiese

    Zwiese Newbie

    Joined:
    Apr 12, 2015
    Messages:
    3
    Likes Received:
    0
    Ffff
     

    Attached Files:

  6. Henry

    Henry Enthusiast

    Joined:
    May 18, 2013
    Messages:
    257
    Likes Received:
    14
    Location:
    Washington State
    How do you like the weber? I'm considering swapping out my old carb as well
     
  7. nottoshabi

    nottoshabi Enthusiast

    Joined:
    Feb 9, 2016
    Messages:
    258
    Likes Received:
    49
    Hi guys great thread, I got a 78 heliux as well, and I want to lower it. I want to do the job right, no bouncy bouncy and can handle a curve. What do you guys recommend?

    @78hilux Can you post your parts info and what you used to lower it? I might want to go a little bit lower maybe a half inch.

    Also my ac/air dials in the dash board are broken. The plastic that stays screwed in the dash board is cracked and rattles like crazy. I need to replace it, i can't seem to remove it from the car. In the manual it does not explain how its connected to the car. Any ideas?
     

Share This Page