Do you know the offset?

 

Thanks Nam. Yeah definitely got to roll lips.
Toy mini. 9 inch wide wheel with 4.5 inch back spacing = -12 offset.

 

Don't forget to pull all that hardware out from under the fender lips!

I thought 9 minus 4.5 gives you 4.5, thus a 0 offset lol

 

I know right those screws folded in there would be purty wouldn't they. Yeah thats what I used to think about wheel widths, but a by 9" wheel's actual measurement is almost 10". So 0 offset on a by 9" is 5" of back spacing. If you have 4.5" of back spacing it comes out to be a -12 offset, give or take .7mm.

 

So it looks like you are sticking out about a half inch so the wheels I want are going to be perfect then.

 

Great. Hope they work out for you.

 

These are them, they have a 30mm offset

STR 606 18X9

 

Around 6 1/4" backspacing. They'll tuck.

 

I just finished putting my windshield molding back on. I also got all all for of the bed side wheel opening braces and tabs removed and hammered the lips out of the way. No rubbing. Though I feel I need to limit the amount the rear suspension compresses. If I hit a huge bump there would probably be some wheel to bed interference. Pics tomorrow.

 

Clean truck man...love the blue and black you got going on I would keep the windows clear no tint

 

Thanks!

 

Any wider and they'd rub. Planed it that way.

 

progress looks great!

 

Preciate it!

 

Clean Truck, Great Stance and nice choice on the wheels.

As for the drop. Just 2'' drop spindles in front and 3'' blocks in rear?

 

I feel like if I painted my truck blue, we'd have similar trucks.

 

wow that's a nice truck!!!

 

Thanks everyone! Nam your truck was definitely an inspiration!

The drop is 4 inch tapered street tacos blocks, 2 inch belltech spindles, a ball joint flip and a little torsion bar adjustment to the right side to bring it down even with the left.