Has anyone performed this operation on a 4rd generation pickup? If so how's the best way to accomplish the task?
Here's a pic of the LSPV hanging free after my notch. [IMG] You can see the two lines coming from the front of the truck. One is the...
I'm here and I can help!
The stock master cylinder and booster work great. There should already be a LSPV (load sensing proportioning valve) on the pickups. Personally...
Well, I would say if you've checked all the easy stuff, and it sounds like you have, check all the vacuum lines. How does it run off of idle?...
Yes, the spacer is there only for the wheel backspacing. As far as pads, unless you are trying to get a bit less brake dust, the loaded caliper's...
The drilled and slotted rotors are a Wilwood part number 160-7105 and 160-7106. You have to get one of each to get driver and passenger sides.
Ok, The hat adapters best price came from Jeg's: [IMG] They run $47.98 each. The rotors are from Summit racing: [IMG] They run...
str8_6, Yes I am using a wheel spacer. But not to complete the brake setup. The Axis Reverbs that I run in the front needed to come out in the...
I will get all the part numbers and post them and the costs soon. For the time being, you can visit the other thread to get the part numbers....
Now, I know some of you are thinking "how did he make those amazingly sweet looking stands?" Don't be going off on my fab skills. Just...
Ok, this is for all of you who have asked for a write up on the brake conversion. It all started when I was looking for a better way to stop my...
Which arms were you thinking of? There are pros and cons to each of them.
Heys guys, these rotors will not work. The mounting holes are a slightly smaller diameter than the hat that will fit over the hub of the pickup....
Yes, the difference is amazing. Well, I went from a single piston caliper on a 10" rotor to a 4 piston on a 12.1" rotor. More pressure from...
Yes the 7.5" 40mm offset with 4.5" backspacing puts the tire in pretty far. But that's what the baggin' and draggin' folk dig. It gives you...
What look are you going for? Lowrider mini, import tuner, grunge, rat rod? And what's your budget?
It's a standard size to the 5 on 4.5" lug pattern. Mine measures 66.25mm on the hub.
I should also mention that for a bit more money, you can get the same rotors in drilled and slotted.:eek:
Ok, here we go, before and after pics. Different sides though..... Also some during pics.... [IMG] [IMG] [IMG] [IMG] [IMG]
Separate names with a comma.
