??? ???sorry.
[IMG] My seats are from a Honda Accord. (not sure what year, '97ish) Just took the mounting brackets off of the split bench and put them on...
I'm not sure what the minimum is, I started with a set of 18X7.5's on the front with a -43mm offset. This put my backspacing at around 5 1/2 or...
Ok, yes you are right, I wasn't thinking. And yes an 8" wide zero offset wheel has four inches of backspacing which should fit with no problems.
Not too long. Probably about 8 hours or so. Let 'em sit overnight then covered them. I do have to recover them though. It was my first attempt...
Yes they are the crossovers, I used two sets of the Fusion Jonah Lomu series 5 1/4" components. Front and rear. I attached the pods from the...
The aluminum in the engine isn't likely to cause any damage at all. Part of the job, (I did mine) will be to pull the oil pan and clean it out....
Fiberglass rocks..... [IMG] [IMG] Just some MDF, fleece, and fiberglass resin. Wrapped in vinyl to match the factory panel - kind of a...
Just a spinning sound? Like the starter isn't engaging the flywheel?
First thing I would do is make sure that it isn't the wheels and tires. If it's been a while since the last rebalance and rotation, you might...
Come to think of it, aren't toyotas more american than the american cars anymore?
Alright, against my better judgement:o ..... http://www.downeyoff-road.com/EngineComponents/EngineConversionKits.html I don't think that...
Yeah, there's a possibility of bags, I did notch the rails in the rear in anticipation of that also. With the lowered springs, the axle hit the...
How many different bumpers are there for the 89-95 pickups? Front only. I currently run the stock 2wd bumper. Need to get one that fits my 4wd...
Oh yeah, I'm talking about the fronts by the way.
I have some non-chlorinated brake cleaner that will not burn (yes, I've tried). :rolleyes: That would probably work too, only it would not make...
Ok, I'm sorry. I know how to cut the sheet metal, I'm just wondering what looks the best as far as finishing it out. Where to cut, how much of...
That is correct. I sold mine on Ebay. Maybe that's my old one......
Well, you've inspired me to complete my original project. Much to the dismay of my wife.:D
I believe the bad MAF would trigger the ECU to run in safe mode which in itself, would not cause the symptoms you've described. It sounds to me...
Separate names with a comma.
