At least that was what I was told by the Lincoln rep just before I purchased my Miller. I originally bought the 135 from my local welding shop,...
Could the fan sound be the clutched fan for the radiator? It will when warm, lock up the clutch and directly tie the fan speed to the RPM speed....
Definitely recommend the miller 175 or larger. I own a 175, bought a 135 first and it wouldn't do the job. It's duty cycle was simply to short....
They are basically the same unit, but with the MSD you need an additional tach adapter. That's what I run. Works great. You shouldn't expect to...
You can request that the machinist bore them out as far as you like, but usually it only depends on how far they need to machine to make the...
Every car or truck that I have owned since my second one has had a custom set of neon made for it. Since I built it custom, and used a color that...
Get him involved early. some of my best memories of my Dad were working in the garage. My son Jacob helping me with a speaker project. [IMG]
Never used one of those, but try this on for size. "The whistle goes whoo whoooo!" http://www.youtube.com/watch?v=YXzgjkYGExU
It's pretty reasonable if you don't know anyone....:rolleyes: The only thing to watch for if you are only painting one panel is how closely...
Chances are that if you are having a water issue, it is not in your fuel system. (Sorry smctoy.) This is why: If you have any moisture in the...
From the sounds of it, the bolt went through the pump all the way to the block. I've had the pump off before. You should reseal the pump and...
It is in fact blow by from the crankcase ventilator. As part of the emissions, the engine burns this so that it doesn't land on the ground or go...
I still have the 18x9.5's in the rear. Expect tire rub on the frame side as previously stated. Probably will be a constant headache in the...
Did you get your checks yet? :rolleyes:
I've been running the Sway-A-Way bars for over a year now. They installed very quickly, just like stock and once I set them they haven't sagged...
HaHa! you also slammed the Chevy sitting on the curb.:D
It will also need the mounting holes slightly modded around the core support area. If you use the 4WD bumper, you will also need the side...
Done, results.
First off, you'd have to convert to the 4wd spindles. There is a massive size difference because of the axle shaft that runs through the...
Do you have a timing light? If so, check your timing again. Also, if the problem started after the timing chain swap, I would suspect the valve...
Separate names with a comma.