Do you mean the Minis store?
Yes, it could put more stress on the bearings, but it all depends on the offset of the wheels to begin with. Ideally the wheel would be centered...
Who makes or sells the Sandeen 708 EDC? I did a quick search and didn't turn anything up. Wait, Sanden right? found 'em.
Well, I check in about four or five times a day, the new posts count had been 20 to 30 average. The last two months have been bangin' overall...
Hey Macawilial, I actually picked up a used XD2000 not long after I finished my setup. The guy I got it off of used in in a 4x4 for airing up...
Well, none taken, and I have. Often. Someone asks why I don't run them, and I tell them that being relatively new to the scene, I was originally...
There is no right or wrong answer here. Don't have too much tank for your compressor, and don't have to little tank for the suspension. I...
The taco kit will not fit. They made too many dimensional changes between years. I second the SAS. My 95 got an 8" lift. But I also did the...
Deadmau5!
Rather than trying to line another make's frame up to yours, why don't you find a 98 or later front clip and save yourself the hassle of all the...
It will always change the camber. There is a very short distance of wheel travel where the camber does not change much and it is located around...
No man, it's perfect. What kind of camera dolly did you use for the first shots of the truck? And I love rock, but techno, house, and hip hop...
Bump for Christmas....:cool:
Yeah, I never noticed a reduced turning radius... but spindles are definitely the way to go. When you turn the torsions, you move the LCA...
Hey Truck Action, does the LC header extend below the frame rails? You know, for us bagged trucks? Had always wondered about that...
I get you, and you are right. Except that even reading all four won't solve the problem of a bad injector or let you know which one is bad. All...
Merry Christmas guys! As a bonus challenge, knock someone's socks off... Try a random act of kindness. And get creative about it.
Well, if I remember correctly, our injectors are batch fired. Meaning that the injectors all fire at the same time for the same duration. So...
And isn't that the #3 cylinder anyway?
What's wrong with the O2 bung location?
Separate names with a comma.
