Photo's & info sent.:waytogo:
[IMG]
To the member who messaged me about the switches.I tried to e-mail you photo's & info ,came back?? E-mail @ [email protected] & I'll get...
I've had my LC Pro Street EFI engine & all that goes with it for some time ,have a close to 30,000 miles on her now. Wouldn't change, it runs...
Forever low,no matter how old!!:cool:
Just remember you get what you pay for!!!:cool:
Desert-- you still have to go into cities to earn a living!! And in the desert you will need to be always looking for some bad ass snakes that...
This one is cab specific,fits the small curve @ the back lower area of the cab! :cool:
Welcome!:cool:
Just get the LC one & their pro street clutch,you won't regret it!:cool:
Call a auto supply store like Napa, & see if the same part number applies to both!:cool:
Got the 96 S-10 camper shell primed , based & clear coated,finished yesterday! Will wait a day than wet sand out & polish,should have back on the...
I just replaced all the components of my AC, got all new on-line!! A vacuum pump & gauges to charge up also!!:cool:
Claif. City is a hub for off road events, was a planed city by Howard Hues to bring in the Concord! But Calif EPA shut that down so no city, just...
With glass work if you use flannel instead of glass mat it is a lot easyier & cleaner to work with. And than use long strand kitty hair body...
My advice is do it once & do it right!! You will in time want it lower--- do the rear 8-piece notch(stronger,as can weld inside)!:cool:
Not a Toyota & not mine! Soon to be my youngest sons, 1998 S-10 Extra Cab,coming from his Grandpa. I drove her down to San Jose,120 round trip,...
I run Castrol GT 20-50 in all my rides!!:cool:
Check all the forms & see what others say!! I beleave the dropped Belltech spindles is the best way to go ,than add tubular a-arms if going to...
I built around a stock console, attached fiber board with screws that I ground off once the glass set up. Don't have photo's of the stock unit,it...
Separate names with a comma.
