well pull the valve cover and start looking for broken stuff...If its a jingle its usually something up there...if its a solid knocking its in the...
most of the time the resistor doesnt go high or low..it goes open. I would just hook up my ohm meter and slowly move the arm checking for an open...
i had from the manifold back built for 200 including the muffler. ( i have no cat, im a 73 ) I used 2 1/4 and it runs and sounds fine. If you...
everytime i get a new truck i change the oil, trans fluid, diff fluid, and coolant since you dont know the history of the previous owner. I think...
old thread. max does awesome work, but i imagine that frame cost upwards or 15-20k if he made it a driver when the frame was done... thats a lot...
i donno, i slammed mine pretty good and the only thing im going to have to mess with is getting my camber back inline...i might just cut and...
pre-smog baby! haha the man cant hold me down lol :nana:
spin the motor around with the #1 spark plug out. when you get the motor to tdc on the crank pulley, stick the dipstick down the spark plug hole....
i dont think you can do the bj flip on the 79..i have a 73 and i looked into it but it didnt look like it would work..the dimple on top keeps you...
um..take a pic of the piece over the cluster, that will help. Im not an expert on the seats thing but im sure someone thats done the swap will...
yep...as long as its secure with the nut ( meaning you have cranked the nut down tight and put the cotter pin in ) then nothing is going to happen...
well those tcases dont have syncros in them like it transmissions....so im pretty sure you buggered the gears inside it..which mean you need to...
get your oil changed and run 93 or whatever is the highest octane you can find. Your oil gets gas in it over time and can sometimes push a truck...
what show was it? and congrats on the mtm coverage! Our club gets pumped anytime any of our trucks make it into the mag...a show is that much better.
Separate names with a comma.
