Well, I don't exactly know the diameter, but as long as the caliper fits over the rotor without rubbing, it's good. And for that matter, if the...
On a side note, I find this hard to read...;)
If you don't own a Hayne's manual, get one. They have complete wiring schematics. Worth it's weight in gold.
Ok, pin 1 on the check connector in the engine compartment should show voltage when the relay is pulled in. Also, this relay is pulled in by the...
Did you try bypassing it separately? Just to make sure? And there is a fuel pump relay isn't there? If so, you might check it.
Steve NIELSEN | ANTI-HACK 94Toy - 600 stebystep PIX Photo Album on Myspace Look through Cando's myspace page picks for project Anti-Hack. All...
I think that's the problem. I haven't found any good insight to why a reverse isn't tunable. I understand the physics of squat anti-squat, but...
Listen... Do what is comfortable for you. I am not here to convince anyone that the reverse four link is the best option for their project. If...
The 4x4 is beefier. It's an 8" as compared to your 7.5". But either will suffice. And yes, Supra LSD.
Make the adapter. Are the device amperages the same? The outlet and the cord cap?
On throttle? Off throttle? There are a lot of variables.
Here are my pics... Front driver's measure 18 1/4" down and 26" up. I'm going to retry this soon, I think I may be having a problem with the...
Ok, thanks for all the responses so far! Keep 'em coming.
The wheels are Axis Reverbs.
Oh, good call.
Yep, setups like that will work. Honestly don't know why you'd plate the underside of the uppers though.
Nope, the spacers are normal. As long as the nut is tight with a cotter pin installed, everything's Ok.
Still running stock A-arms? I love that bed style. Still my favorite.
Those setups are fine. I would suggest however to set the upper bag plate to sit a bit more parellel to the lower plate at ride height. While it...
How much lift can you get front and rear from your setup? I want to see pics showing measurements and setups, if you wouldn't mind that is. I...
Separate names with a comma.
