Doable!!!:cool:
Low ( slammed ) is always good!!!:cool:
Welcome , truck looks good!!:cool:
Next Saturday---a long over due show for me!!
Half way through this show season ,here's my list updated [IMG]
Welcome! :cool:
HP cost $ plain & simple,it's that way with any engine!! These little 4 bangers have plenty to offer, you just have to commit to doing it,if you...
Only photo is with them on my truck,there the met red that my truck is & no switches. I used the stock bezels & switches from Electric Life on my...
Welcome!!:cool:
I bought my 8-piece notch from Steve @ Can Do, he was going to do the install , his welder was down so he sent me to a shop in Sacto. I'll see if...
You will in time want to go lower,so do it right & do it once!!:cool:
Welocome!:cool:
I still have the power mirrors I removed from my truck!! $100 plus shipping!:cool:
Frame work should be done with a 220 welder to get the penetration needed to produce a strong weld! And I would go with a 8-piece notch so can...
Welcome!:cool:
Just replace the stock arm switch,maybe find one at a wrecker!:cool:
I run 18's on my 88, have dropped spindles & CanDo tabular a-arm. Note ,make sure that the wheel goes all the way to the stops when at turning ,...
Slam that bitch!!:cool:
Welcome!:cool
I went with a GM 12SI billet cased from Quality Power,supplied me with a plug from Toyota to GM,100 AMP'S @ idle,160 @ speed!:cool:
Separate names with a comma.