i even have the heat shield on it so it makes it look decent for a stock mani Delete the heat shield. This is what caused the exhaust manifold to...
There's only one ported manifold hose on the Weber (distributor vacuum advance). The original factory carbs had all kinds of vacuum connections to...
Toyota had a recall on the V-6 for the head gasket. Run your VIN through Toyota dealer and see if it was done. If not, you might get it fixed for...
The 2wd, 8" axle (GO82) comes with standard 4.10 gears. (4 cyl). Not sure if they changed it for the V-6.
You say everything is "new". Does this mean rebuilt or factory new.....or just new to you? A new or rebuilt carburetor should have all good parts....
My trucks a 1978. The levers do not move. The panel slides over them. Yours looks the same. Maybe Toyota changed things with later models....
The plastic knobs pull off of the control levers. They're held on with spring clips. I can't tell from your picture if you've already done that....
There used to be a interchange manual by Hollander (?) that gave all that info. Not sure if they still publish, but many salvage yards may have...
Only way to know for sure it take them to a machine shop and have them checked.
That's the backing plate. Has nothing to do with rotor warp. You can't use that for a sight line.
Pulsating is usually caused by warped rotors. Yours are new, so that shouldn't matter unless they're warped from the factory. Does your truck have...
Most likely the tail shaft seal on the transmission is the cause of the leak. This is a common fail item. New seal usually less then $10.00 and...
Cheapest way is to go to a salvage yard and source all the brackets,pumps,hoses etc from a junker with power steering. It will also allow you to...
I'm with YOguyDA. Toyota only used that one bolt pattern in 1977. If your wheels don't fit, there the wrong bolt pattern. As far as 64K original...
You need to be more specific. If you have 5 lug 114.3 rims they should fit your truck with no problem. Factory wheels are "hub centric" and should...
This is from a prior post. Great if your toy is 1972-78. https://www.toyotaminis.com/forum/threads/windshields-windshields.21793/#post-220236
Just did a Webber 32/36 conversion. Have a Aisan 38290 carb with phenolic spacer, from a 1978 hilux along with a second Aisan carb(unknown model)...
Thanks. No luck on my end either. Looks like it's fabrication time .
Looking for a source for metal rust repair panels for 1978 standard cab. Need the passenger side. Thanks in advance. Fred
Check your grounds. Starters need really good grounds to carry the amperage. If the problem doesn't go away, check the starter and solenoid.
Separate names with a comma.
