Check all your vacuum lines running from the carb. These tend to dry out and become brittle. Find a vacuum gage somewhere and attach to a...
The aluminum radiators tend to be slightly larger then the copper. Most need tweeking to fit correctly. If you can find a new copper radiator,...
Those Asian carbs are a bitch to balance out. I still have problems on really hot days with the mix being too rich when restarting after shutdown....
Have you considered a NOS system? With the bottle heater, you can really fly with the pedal to the metal.
I would try chasing the threads with a tap first. Many times it's the first 1/2" that's cross threaded. Try a new bolt with lock washer. Remember,...
The stud is the same diameter as the bolt. Unless you put in something like 4" long , it'll work fine. Helicoils can be tricky to install,...
You still have to do the initial time set up as described earlier. (you removed the distributor). If no instructions with the light you can google...
Hard to set timing without a gun. Most places like advance auto or auto zone have a tool loan program. Or just invest in one. You can try setting...
That is the distributor hold down bolt as first80 stated. You can try chasing the threads with a M8x1.25 tap. If that doesn't work, consider...
Not sure what you mean by "rotor". The only rotor I know of is the one in the distributor, and that doesn't require a bolt. Most all threaded...
Separate names with a comma.
