2 hours unless there is a breeze so you have to turn the flow up, you have a pin hole leak or just forget to turn the bottle off when you go in...
Use 3/8" machine washers and bolt them in. No need to think too hard about a non issue. Besides getting the cross bars out of the shocks will...
If i you were talking to him about 75/25 then it was a 40 cf bottle bottle which is under 2 ft tall. It is a common size.
That 40 cf tank would piss me right the fawk off. :lol: My 20 lb bottle holds 175 cf so its half the cost to fill and just shy of 4 times the gas.
As long as you're not in a hurry to get anywhere you'll be fine. They are reliable but not overly powerful. The later 2lt was a bit better since...
My 20 pound CO2 bottle is $16 to fill. I got over the slight increase of spatter quickly when the fill cost went down and the bottle size...
I run straight CO2. Cheap and it works for my welding style. Argon/CO2 mix is good too that can be used with mild steel wire to weld stainless...
I had an 83 W58 in my 78 I had to cut the cross member and move the center back about 1 1/4" otherwise it was a sweet swap. For whatever reason...
I'm not exactly sure what the reason is for the change is but I have a few sets of hubs, rotors and calipers here and there is a difference. My...
Yes you can cut the bracket off. I have a dash mat on my 84. Not that it needed it since the dash is perfect but it came with a parts truck and...
I had swapped the carb on my 84 awhile back and while it ran well it acted exactly like the accelerator pump was shot. I hadn't been driving it...
21ru is junk. It's a backup, backup, backup engine at best. :lol: I've converted 2x to 4x a couple times, it's not hard at all. There is far...
The older optima's were good. Buy one now and odds are you'll be swearing AT it not by it. My wifes 4runner has a 9 year old yellow top in it....
Both my trucks are carb'd since that's how they came. Unless you're planning on making a whole bunch or naturally aspirated HP going from EFI to...
The manual pitman arm is shorter so it'd be slower to use it on a power box. The sector shafts are different sizes either way, the power box is...
When I get out of my freightliner I prefer to leave the huge steering wheel there, it has a 20" wheel in it. :lol: I have an 11" steering wheel...
My 90 still has manual steering and I swapped an 11" steering wheel on it to make it steer even quicker. The power box has a slower ratio and...
That would work but the only actual performance gain would be to those running coilovers. If you're still running torsion bars all the stress is...
The cross member itself should be the same. It's just the mount that bolts to the cross member that'll need to be modified if anything. If i...
Call the shop on a friday and ask for Marlin himself. He's only allowed to talk on the phone on fridays so he can build trannies the rest of the...
Separate names with a comma.
