Holy **** ya don't see OZ audio these days. Back in high school my bucket 79 mustang had a set of 5 1/4" mids with tweeters and 10" subs all...
Delta cams has sweet deals on toyota parts and they are on your side of the mountains too.
All 4x4 4 runner front clip, finally put the valance on a few days ago. :D [IMG]
Sounds like you have a lean miss at part throttle. Probably a clogged jet or the spring loaded air valve over the secondary barrel is sticking....
My DD is on the chopping block. I'm bored with it so it's time to move on. Delivery to the PNW is not a problem since it's a driver I can easily...
Which dash style do you need? There are a few dashes, one that the whole top part of the dash is the pad and the black bezel around the gauges is...
You should have no issue with that selection of parts at all. Did you replace the clutch release bearing? Is it back on the clutch fork correctly?
What color dash piece do you need?
The oil pan is stamped steel. You can dent it with a hammer for clearance, cut and weld it for clearance or as you said move the end of the mount.
Nothing is in the way. The 2 nuts are connected by a piece of sheetmetal so once you pull those bolts and the other two out and put the balljoint...
I had an 8" bazooka in front of the passenger side of the bench of my 78. It sounded pretty good for what it was.
Umm that was constructive criticism. I have given pros and cons of both gases and bottle sizes. Not sure how much more constructive I can get...
Get the factory efi manifold and wiring harness from an 89-95 truck. It is by far the easiest efi you'll be able to bolt on. There really isn't...
Those boxes aren't too bad especially for the cost. I keep thinking I need to pick up a top box like that since my 4 drawer cart is completely...
Hold the center adjuster screw while you back the lock nut off a turn or three. Then turn the adjuster screw in a little at a time and wiggle the...
No problem. Have them plate the area's that cracked too. It is pretty common on that generation of truck to have a broken clutch pedal mounting...
So did you lighten up the tension on the air flapper in the AFM? I tried that placement in my wheeler and had issues with the rig running overly...
5 years later, you're lucky I reminded you without realizing you'd forgotten. :ROFL:
If those are true projectors that isn't a terrible price.
Drop lower dash, climate control duct and column. You'll now be able to see that the clutch and brake master cylinder studs hold bracket to the...
Separate names with a comma.
