As much as I'd like to try a Borla odds are I'll stuff a magnaflow in there since I know the sound.
Not the I'm getting older it's that the exhaust sounded like ****. :lol: It's still loud but not so raspy. :D
While 5 isn't needed it sure is nice to have an even split between the lower gears. :lol: The exhaust isn't too bad now. I cut down an...
So my W58 is now a 4 speed, at least temporarily. I broke the 1-2 shift fork so now first works if you're careful and second won't engage far...
Moving the wheel mating surface back is going to open up a whole can of pain in the ass. I forsee rotor and caliber clearance issues in your...
I ran out of motivation after the whole primer, white, color, clear dance on the parts I did paint anything other than black. :lol:
Don't be a p*ssy. [IMG] That was the engine I rebuilt for my wheeler once upon a time. It was sweet. :D
CNG and LPG are different. :lol: LPG is a dry fuel so you need to run an oiler in the intake tract or the valve guides will wear out and you'll...
Early (pre 84) flanges have 8 mm bolts and a more rectangular pattern. Late (post 84) flanges have 10 mm bolts and a squarish pattern. Swapping...
Yup it was a sloppy where before with both bushings being trashed. Now I need to make a short throw shifter for it. I have 1/2 and 1" uhmw to...
There was a thin bushing much like an a arm bushing with a metal sleeve outside, rubber then an inner metal sleeve where the tip of the shift...
Finally took the time to do something besides remove rubber from the rear tires last night. :D I swapped in a set of bucket seats that I picked...
If you REALLY want 3.44's then dig up a 7.5" housing from an early truck and I'll give you a diff.
Yea that diff will work. As for the rear discs I'd look at some from a supra along with it's calipers too. That will give you the right bolt...
Lower passenger side of the housing going through the diff is about 3" long.
Probably not going to find much in the aftermarket. The 3.07's are out there though. Just remember to grab the one longer stud that is specific...
Looks like a blast! The auto x track that's local is on an old 1/2 mile oval and the midway. I'd say it at least double the size of that...
Good luck! I'm surprised you're still running a 7.5" axle. Not that it won't hold up obviously but the 8" has far more readily available...
If you watch you can catch some good deals. I picked up a brand new uninstalled set of bell tech spindles from someone here for $160 shipped to...
No fawking way would I live somewhere that required that level of bull**** to keep what is mine from being stolen. The keys don't leave the...
Separate names with a comma.
