Damn the r888's are one of the cheaper tires in that size on tire rack. You won't be catching me running rubber that expensive that isn't a full...
I've always drilled the holes and ran stainless screws with nyloc nuts on the backside. Sheetmetal screws will work but they'll normally start...
G codes came in all 1 ton trucks those with a V6 and carb'd trucks with 4 speeds. My 90 had a 4 speed and 3.07's.
Score on the runner. There is the master and booster, bigger radiator and whole front end for your truck, sweet! Find a g code rear axle and...
My class allows slicks if I wanted to but that would put me up with guys I could never really compete with. Running street tires (/t designation)...
I think the cobra wheels will be the best bet for cheap. I found steelies in the right backspace and width for under $350 shipped but the cobra...
Smaller sidewalls definitely help in the control department! I'm on the hunt for some 17's to slap some 245/40/17's onto for dedicated auto x...
I haven't had any issues with slow steering. Our courses are very open and high speed, we aren't putting around in first gear trying to run a...
Same here! I'll have my wife running the camera more than just a single craptastic run for sure. I guess the place we're running next weekend...
Tires just went on this am. Fronts are just fine of course but the back is stuffed! I had to pull the inner fender bolts above the tires and...
Verdict is in. I'm going to be running FSP/T. Good thing too since I just ordered 265/50/15's for the back and 215/60/15's for the front. :lol:
Around here the courses are pretty wide open so people have a better chance to screw up carrying too much speed into the corners. I spent a lot...
Japanese lines are all m10x1.0 it's the flare that's different between vehicle manufacturers and I reckon a place that builds them ought to know...
Because that's a hassle when there are nice guys like me that will walk out to the garage and measure one. ;) 13 1/8" tip to tip fittings...
I'm a big dude with big arms so I just put a small steering wheel on the truck. The manual steering box is fine with me. :lol:
If you have a welder just grab a couple bends from the auto parts store and raise the arch over the axle. ;)
WTF? Fix the tail pipe and leave the blocks at 3". You could probably gain enough clearance by just tweaking the hangers up a bit.
A/C is nice enough but power steering is over rated. :lol:
I like the manual steering a lot more than the power for "spirited" driving but for day to day the power steering of my 84 is nice. I've thought...
Gawdammit... The wheels were out of stock in the warehouse and they didn't bother to notify the store they just didn't ship them. My tires...
Separate names with a comma.
