Yup first step is to pull the plugs. If one or more is absolutely spotless clean then that's a head gasket steam cleaning the cylinder. The...
Yea I went with kyb monomax front and rear. They are stock length so any off the shelf replacement will be fine.
[IMG] 2" drop spindles and lowered torsions, 3" blocks and pulled middle leaf out back with a mini notch. Tires are 205/60's out front and...
Whether you "believe in" performance pads or not they have their benefits. Cheap organic pads will stop great when cold but once they are hot...
So its a roach but it has a couple parts that are handy. No possible way I'd go over $500 based on your initial description. Odds are my offer...
My 84 has had the same issue since I put it together several years ago. Sometimes it'll start on the first turn of the key, others it's the 20th....
Sorry, forgot about the measurements. The weber base is 93x46.5mm. Stock 22r is 96.5x50mm.
Funny, I always disable the annoying chime and simply turn the lights off. It's easy to remember to turn them off since I only use them at night....
195/50's should clear fine. I've got the same spec wheels on my 90 with much wider rubber and they clear. On a side note I'm thinking of going...
The control box is behind the passenger kick panel. The harness should be taped back to a harness in the area. I did the same swap on my 84 and...
Yup smells like a vacuum leak.
If you hold the trap door in the AFM open when you start the truck will it stay running?
The factory air filter housing will cover up the carb and egr block off easily. I can measure the height of factory and weber carbs tomorrow if...
No problem, the 2 piece adapter isn't the best setup ever but it works and it puts the carb at the correct height for the factory linkage to line...
Ahh agri northwest, I have friends up that live up that way so I spent many a night hunting coyotes and rabbits around that area. :D When you get...
Hmmm 10 wheelers, I work for a spud farm out in burbank so that's a common sight for me. :lol: Nice truck, I'm guessing you have a notch out...
Welcome, I'm in Pasco too so we've probably seen each others trucks and not realized it. :lol: Drop spindles are never a bad idea, I have them...
Yea that's a rather loaded question. A simple shock addition/change and the addition of sway bars would make a huge difference.
Turn the key in the ignition to accessory with the steering column shroud removed and push the button on the bottom of the lock cylinder and the...
I was thinking about where to find that type of adjuster awhile back since I mounted my supra seats to the floor and having the seat belt rub...
Separate names with a comma.
