Righty tighty lefty loosey. You'll need 2- 7/8 or 22 mm wrenches. One to hold the lower nut up against the cross member and the other to turn...
I'm running monomax's on my 90 and they fully kick ass. The front was slightly spongy till I swapped in 1 ton torsion bars. That firmed it up...
So old Walt is up to $1300 now eh? It was $1200 a few years ago and the truck hasn't moved in longer than that. :lol: It's not a bad deal at...
The best part about the oddball piston is that everything you have been taught to be true will now come into question. It's common knowledge that...
Right is stock, left is factory replacement. Years ago my dad and I tore down the 350 in an early 80's caprice that had just driven straight...
Incredibly sexxy I know. :lol: [IMG] Their radiators are aluminum not stainless. ;)
Simple volt meter to the battery posts will tell you if its charging or not. Anything above 13 volts is good but 13.8-14.4 volts is ideal.
These were better than nothing but not by much. :ROFL: [IMG] You seriously spent money on a hubcap? :lol:
86 and later are easy to spot by the machined pad for the turbo model oil return line on the lower drivers side of the block. It is a central...
Little late to ask that question since you just got your engine together isn't it? :lol: 81-85 22r and 22re are the same and 86-95 are laser...
We did 7 runs today and I have video of 5. Luckily my wife didn't get there in time to shoot the first 2 runs. They were an epic clusterfawk for...
No specialty tools required. The only issue you may run into is getting the crank bolt loose if it has never been removed since the factory....
yes absolutely do-able in the rig.
ENGNBLDR.COM, ENGINE PARTS NETWORK is the only place I buy engine parts from for toyotas. They carry chain kits with steel backed guides and will...
I got 8 runs in today. My wife toughed out being awake for 30+ hours and got video of the first 4 runs before coming home to take a nap. <iframe...
Sort of. Yes the corvette still runs leaf suspension but it has been a single slab of fiberglass not an off the shelf leaf pack like most would...
He speaks in riddles sometimes. :lol: I'm guessing he means running leaf springs laterally like in an older corvette but I could of course...
Yea the rubber isolators are still there. Once I put the fuel cell in I'll have room for a proper traction bar which will negate the rubber. :D
Yup the parts showed up Monday as scheduled thanks! As much fun as it is now I can only imagine how much better it'll be with a few more key...
Yes the 1 piece requires raising the linkage to match the carb height. All toyotas from 79 and up are cable so it's the same story with all of them.
Separate names with a comma.
