should tuck........ Gil89 got 16x8 starions with -11 offset all the way around and he tucked. he massaged the front 2wd fenders some in order to...
not hard at all........ if you have an impact gun and a 22mm socket for it then its easy..... otherwise you'll need a socket and a long...
sorry guys, truck is being sold complete since im getting my full asking price for it. :waytogo: ill keep an eye out for more starion...
thats fine....... you can crank it down to 3 inches up front 4 inches out back is cool too. for blocks (im assuming thats how you'll drop it back...
just to clarify that is the 92-94 4Runner front clip........ you can do a 89-91 4Runner front clip and still retain the 2wd Fenders as we did for...
hey, think yer on the right track but i'd suggest the ball joint flip to keep some rigidity in your torsion bars........ dropping it 4 inches...
sale pending
if yer looking within the next month or so....... i may have a 5 speed up for grabs...... rebuilt with about 15000 miles on it.......
not much else to do without either dropping it with the torsions, replacing the spindles or, lower control arms. yea...... some of the ball...
sorry guys. forgot to update but the cover has been sold.
you guys need to see this truck in person........ not to mention all the molding and shave work that was involved...... ill see if i cant sneak a...
front is dropped around the 5-6 inch mark........ (forgot exactly) since he went to a slightly taller tire the front rubs once in a while. we are...
so if i do not find a buyer for my truck by the end of this month i am taking the next step and going to part out the truck. after careful...
86 toyota pickup, standard cab, 22R, 5 speed. has 165k original miles on it. Price $3000 firm. build thread and pictures here>>>...
here's the link to it........ http://www.toyotaminis.com/forum/showthread.php?t=6708
well........ use what you have at your disposal....... you can use a heat gun or torch to heat the bolts and allow the oil to seep into the...
try a cable off a v6 equipped toyota pickup or 4runner. any year pickup or 4runner before 95 will work. thats what im using for my holley setup....
how big of a breaker bar are you using? the way i adjust them is i bought a closed end 22mm wrench roughly over 1 foot long....... i use this for...
best bang for your buck....... get rid of the stock carb and get a holley or weber to open the front door. get a header, and decent exhaust system...
by the way....... leaning the shocks out a touch also cured the axle wrap........ when i launch it @ around 3000 rpms its just duo-tire-fire fury...
Separate names with a comma.
