I’ve used the 6 pin solid state regulator for years with no problems on my 1978. I believe the mechanical regulators used 5 pin instead of 6 (not...
Nice looking body. Really clean. Don’t know how accurate the odometer is (5digit). Can I ask what you paid for it?
Don’t think they make any now. They make a universal unit but you won’t be able to use your factory gage (different ohms). As a “stop gap” you can...
Go to summit racing. You can buy 14” white wagon wheels for about $50 each. With free shipping . That’s what I’m using. 14”on the front, 15” on...
Forget the 114.3. It translates to 4.5. Most Jeep wheels will fit. If you limit yourself to 114.3 you’re not going to find much selection.
Any 5x4.5 wheel will work as long as the center hole fits the hub. Toyota wheels are “lug centric “ as opposed to “hub centric “. The center hole...
It’s probably your sending unit. Pretty common with these old Toyota’s. Gauges rarely go bad. It’s tough to find replacements unless you go to...
I would be hesitant to use both wires. If one is ground you’ll just blow the fuse. I had water choke on mine before the Weber conversion. If you...
You only need a 12V ignition feed for the electric choke. You only want 12V when the ignition is “on”. If you don’t have a multimeter a 12V test...
You only need 1 wire. With the ignition in the “on” position test each wire for 12V. Use whichever wire works.
Probably for the smoker in the bed.
If you’re desmoging you don’t need the reed valve. The nipple coming out of the head between #2/3 intake runner connects directly to the passenger...
Put a jack under the transmission and lift it up (slowly). Keep trying a little at a time and see if that works. You may have do do a combination...
The 8” diff should have the code GO82 on your ID plate under the hood. This is actually a 3/4 ton axle. The gearing is 4.10. The GO82 axle shafts...
If you’re swapping from a 4 speed to a 5 speed you need the saddle from a 5 speed truck. Either that, or lots of fabricating.
https://asheville.craigslist.org/rvs/d/barnardsville-toyota-sunrader/7073937453.html It’s a camper but should have a lot of low mileage...
Any manifold vacuum source will work for the brake booster. Your manifold should already be setup with a port for the brake booster.
[ATTACH] I’m glad you’re getting the manual. It doesn’t take much to destroy some very expensive ignition parts.
The igniters are very fragile. You should never test this by placing the power line to ground. You’ve most likely “fried” your igniter. At $250,...
I’ve had 2 of them. Any HEI wire will work.
Separate names with a comma.
