Hope he new not to over tighten the spindle nut .kinda a givin there
Yea it can be done like that 3 inch blocks and some drop spindles and ball joint flip for the front would ride better than loosened torsions cap...
Something^ fishy ^ about this .....skynet is learning
Might wanna consider a c notch or a baby c if your going that low And as far as hauling stuff I believe the drop leafs can hold a fair amount of...
First I would check for spark and fuel from what you described it doesn't sound like mechanical failure it can be electrical and the motor will...
What about trying to make a torque arm like camaros and firebirds bolts to the diff housing and runs the length of the drive shaft and bolts to...
I bet fellow tm member slacker could make a good lookin lip kit for 89 up trucks that fit the body well and isn't vented and flared drastically...
In my opinion the 89 and up have some of the smoothest body lines ever on any small pickup to this day and keepin it clean and pure with a mild...
That body kit has to add at least 30,000 horsepower
I second the duplicolor bumper paint I used it on my front grill bumper and valance holds up great and you can apply armor all to it
Very clean truck love that wood bed awesome idea
Looks like its time to weld up some new bracing I'd get some square 1by1 steel tubbing and beef it up mine is starting to look like that as well
Like he said replace it sounds like the diaphragm is starting to leak there's a weep hole on the bottom of most of the pumps if it drips its done
Looks good man and excellent bike choice
Hmm possible bearing thickness difference haven't ran into this compare the two?
Do you have the washer that goes between the outer bearing and wheel nut ?
What's the part number on the box I don't have bell techs but maybe somebody on here can relate the part number for comparison
(The point is still "MORALS". No amount of anti-gun legislation can provide that. ) Right on point.
He means there's very little room major squeeze I didn't realize that your trying to do this to a 77 model . Have you considered a gm 4.3 vortec...
Hahahahaha . That's all I needed .
Separate names with a comma.
