bump forgot i still had this:D
you dont have a ball joint puller do you? :ROFL: loads of fun trying to seperate them without one. they look like this [IMG]...
put some gas in the tank. take the gas cap off. get a compressed air spray tip. wrap a rag around it and jam it in the gas tank filler...
to make it easy to find a source wire, id tap the pos from the tach light into the lead for the heater control light behind the dash. then just...
mostly everything you need to know for the electronic swap here http://www.toyotaminis.com/forum/showthread.php?t=389
not tryin to thread jack so heres my favorite part [IMG] rest of the pics here...
valve lash- .08 intake .12 exhaust dwell- go grab a electrionic dizzy n coil from a 78+ and install it :D
if you have the bent pieces already ill weld it up for ya for a 6-pack. :D or another option is to try to find the coveted non-catalyst...
ya the rocker arm clearance sounds right, thats the oem specs. i like to get it as tight as possible so i can jus barely pull the feeler...
thats some killer work right there.:waytogo: kinda a coincedence but for the last week or so ive been hanging out with mickey harris. he's...
that person is a crack smoker. the PS systems are pretty good. 1 finger parallel parking good. a good box will have NO slop in it. the...
oh, see i told you i got confused. :D ya you will need a new gasket. when you torque the head down the gasket will get imperfections...
wow your so confused, i got confused.:D so your not checking the valve to piston clearance. your checking the rocker to valve clearance....
wow that was a sweet show. lovin this, only thing i would add is a "violin case" in the back seat ;) [IMG]
were all of your rockers hitting straight on the valves? specificly #2 n 3 exhaust? the rocker spacers will wear away and give you a...
wow:eek: anybody else notice the acura emblem on the motor:shrug: wow:verdict_in:
i use trillian. http://www.ceruleanstudios.com/ works with mac/pc aohell, msn, yahoo, skype, and any other IM program you can think of. key...
sounds like you may have to re align the verticle tracks for the window, if they dont hold the glass tight that can happen. you can also...
come see the wagon in person :D
i would use flex pipe as a last resort. in that scenario i would have to weld the exhaust to the frame through the holes, and i would use the...
Separate names with a comma.
