Another well known name in the Mini Truck & Custom Truck world comes to a end! Will be missed!!:cool:
[IMG]
That would have saved a lot of time, but I wasn't even sure what design or pattern I was going to use. I made around 5 different ones ,taped them...
Welcome aboard!:cool:
Go with a 8', I'm not bodied or Z'ed, but do lay frame! As for a larger bolt in ,I haven't seen one, & any bolt in I would weld after in place!!:cool:
My advise is get another lager notch,as you will bag it in the future & this is way to small. Yes you will have to cut the bed out,or rise it up!...
Just click on the link & it will open!:cool:
KBS Fabrication – Product Categories – Notches This is the new shop name &owner,was CanDo where I got mine from. Also...
If you think you may bag your truck at some time than don't do a c-notch,to small, do a 8 piece regular notch!! Do it once & do it right!!:cool:
You will hit !! Install a notch kit,I recommend you use a 8 piece notch so as can get welds at the side also !!:cool:
So my 2nd winter project is repairing the tabs for the aircraft type lock down buttons ( ZLoc fasteners). The tabs were welded to the edge of the...
If I remember correctly that is a Freaks member & lves up in the Santa Rosa area!:cool:
I used a 92-95 4-Runner bumper & valance & welded the two together. This in conjunction with 4x4 fenders,the bumper lines up with the fender...
Each winter I address problems or make some tape of change to my truck to stay competitive the following show season. This winter started with...
After market replacements parts suppliers will be your best bet! Got mine through FBI when they were going strong,gone now!!:cool:
Yes ,may every have a great Thanksgiving with family & fiends.:cool: [IMG]
Welcome!:cool:
Welcome & nice truck!:cool:
Welcome & nice find!!:cool:
Separate names with a comma.
