Not sure what year your truck is or if it uses the same as my 88,but when I changed the brakes front & rear I needed longer studs by a 1/4'', used...
The photo above is a friends 86 or 89 Nissan Hard body that we made a tilt bed of, used a single convoluted bag. He lost the truck to impound...
[ATTACH]
Correct!!
Also can not view messages ,only on e-mail notification!!!
I see no way to delete old messages??
12.5 gal. tank same as the stock one, 225 mile range, Pro Street engine, staying at 65 + 32 mpg, 75 to 80 +27 mpg
Yeah,the bushings I removed I changed out in 2006 when the new LC Pro Street engine went in ,the shiftier is there short throw unit. I've had a...
So one of the things on my winter work list was to change out the nylon bushings on the trans tower that the sifter shaft sets into & on the shaft...
Relaxin'SoCal will be at a different location this year,no filer as of yet!!
Got 6 of them on my list , more to come as the fliers come out!
Lay some griffiths on it & new clear coat!
2013 New look
Welcome aboard!
ONE OR TWO PIECE DRIVESHAFT,IF TWO CHANGE OUT THE CARRIER BEARING
Welcome , truck looks great!
The bleed back is fixed using a 680 ohm diode, so easy fix!:cool:
My truck is much earlier, a 88, I went with CanDo arms as wanted the torsion bars gone , they are in the way for laying frame! I used the Betech...
Now working on fixing a bleed back problem with a small LED at the dash that lights up when the electric fan comes on. Been annoying for some...
Welcome , clean truck! While you had the seats & carpet out you should have installed some insulator/ sound deader like FatMat, it works very...
Separate names with a comma.