Bushings are the bushings above your axle still in.The ones that are on top of your u-bolts.What size drop blocks?
Nice How much did you get that beauty For if you dont mind me asking. Any more pics of interior and engine?
Starter Dont forget to remove your starter.Take off drive shaft and wiggle it left to right to get it off the spline. And get ready cuz its...
caps What did you torque caps to? DId you lube them first? Be carefull with pipe wrench put on the cam sprocket and bolt and turn it with that.No...
Pics Welcome.What you workin with?
Timming Starting problem could be timming.Recheck your timming.Cam sprocket is probably off a notch or two.
marry? Since the bed is of give larry a mate.It's only right.
bed Look at my avatar is it the same tailgate? My bed is an 87 had to cut upper corners and indent on the bed to put on hooks for the latches.LMK
carb Is this a stock carb?
Freekin lucky. $50. bucks. Are you kidding. Thats a $1000 dollar or more truck where I'm from.
carb Check your fuel filter,lines,all of that. maybe fuel is being restricted.No vacume and egr. Did you lock open your butterfly's?More better...
Carb So It's a completely stock carb? Sound like it needs to be cleaned. You said you got your friends carb but it runs rich. Explain, high idol?
Headbolts might not be sitting Tighten those bolts down till you see the rubber compress about half way and thats good enough.I had the same...
I would like to run airshocks in the rear of my 87.I need them to drop to about a three inch drop and raise to stock height or higher.Is it...
trans Gotta drop trans to know for sure. Could just be clutch problem. Check trans oil, look for shavings. Make sure your flywheel didnt come loose.
Bent valve Check compression if its good probably a bent valve. Not closing. Easy fix. I recently had the same problem. My valve guide broke and...
Check spark. If plug doesnt have anything on it why do you think its fouled. Usually fouled plugs have lot of carbon. Take the plug out leave it...
pics Yeah lets see some pictures of you oh I mean your truck.LOL
Made in Malesso [IMG]
Parts Good luck with that bro. Not like guam where parts are everywhere. Put up some pics.
Separate names with a comma.
