Here' they are ,hard to see with any glare! Any way had to retape & will reshoot,not enough paint after wet sanding!!!
Yea,loaded the wrong ones
Got them shot yesterday will wet sand out today & get all clear coated
Custom made,no kits.
Got one side & the rear ready to shoot,will ready the other side tomorrow & if I get some good weather shoot all in the coming days!
So I plumbed up a out air draw for my new compressor!
Yes on the PVC,1''. And yeah, I did think about the fans,explosion proof fans are big $$$$$, I think not a problem if not turned on or off while...
Yes on the PVC, 1''. And yeah about the fans,explosion proof fans are big $$$$$$$$$$$$$
I had made a paint booth to cover my whole drive way, he was cool, said I had done a nice job of it,trap on ground,fans ,filters,ect. was only...
No on neighbors, doing this in the garage,last full paint job with a paint both guilt in drive way had a city inspector here!!
So finished shooting the base coats & got one coat of clear shot, wet sand that lightly & lay out the ghost flames ,that shoot them & 4 to 5 coats...
Here's a link to my coverage of this event this past weekand http://www.streetsource.com/gallery/events/your/view/116634
Welcome:cool:
Welcome!:cool:
Napa or a good auto supply will have them!!And use shrink wrap!!
Retired, started my project when I retired in 2001,but it is a lot of hours of work to get it to where it is today!!! When I started it I spent 8...
I run the Air Lift Auto Pilot ( first gen), the controller shows tank presser & all 4 corners.
Yeah, but if I can spot paint & get it to match that will be good,if not I'll have to reshoot the whole bed, than one coat of clear wet sand, lay...
Got the metal work done & filled with body filler,will sand out & shot with primer today. Spot paint within a day or two!
Welcome!
Separate names with a comma.