Doing alittle hvac apprentice rust repair on the rockers. Have some scrap tin snips and a welder. Im dangerous! Drivers side was worse. Got it...
You probably want to drop the truck before you look into shocks. Your probably got to have to change the mounting location.
Now what exactly are you trying to achieve. I dont think anyone totally knows what you mean.
Started working on the exhaust today. Got it piped to the muffler. Got to figure out a route for the tailpipe. Also have to add my hangers. The...
I wanted the crush hub to stay somewhat safe if I wreck it.
[ATTACH] [ATTACH] [ATTACH] [ATTACH] Finally got around to picking up a quick release for the steering wheel. $100 momo hub (the only good thing)...
So after thinking and talking with my brother I realized I could of started pulling plug wires with it running to isolate the cylinder or even...
Started tuning it today. Pretty much there. Good enough for now. I did take a video when it was way off because it sounded like a tractor. Noticed...
Just got the pertronix igniter and coil installed. Started right up. Super happy. Not totally ready. I need to replace the screws holding it down...
Well looks like Im going to need to get her registered and get some plates. Landlord is getting pissed. The neighbors have a couple pos's that...
With you're info im not worried. This is the way to go for me. I looked into the dui system more and realized i would need new wires at close to...
I just went ahead and ordered the ignitor 2 [91641] and the 3ohm coil. Ordered off Advanced auto with a 25% off coupon bringing it to 147 and some...
Probably going to buy it forsure if I cant get it going tomorrow with my brothers help.
The motor was swapped to a 20r at some point. Good info tho. I just wanted info on the 75 celica and if it had a 20r. If it did I assume it would...
Threw the points and condenser in and nothing. I'm going to ground it a little better but I dont think that's it. Coil may of went out. I did have...
You can always downgrade your pics to make them 2mbs. You should get them up. If this works it ill be a great upgrade for people to do to these...
well after hours of searching i cant find it. If i ever do again ill post it here.
There is a thread on here about it. The main concern is caster angle or something with the newer spindles flip. Could lead to catastrophic...
For the first time in a long time in Washington it rained. Still waiting on the points. Wasn't going to work on the exhaust in the rain so an...
The premature ig post before it went down hill. This was before I opened the choke and messed with the idle speed. Also plan on getting closer...
Separate names with a comma.
