It didn't come installed in anything USDM. But are often found as replacement motors since they got taken out of jap cars at 50k miles.
I have a front bumper and grille from a 79 2wd. Hit me up.
Love it love it love it! Wraps are the ****. I've done smaller ones at the body shop I used to work at. Always liked the concept. What were your...
The header collector is close enough to the front tire it rarely drags. Mostly just speed bumps if I come down to fast. A few tacks will brace it...
Ill have to look at my closely. I might just make a metal ring and try it out. I run a 205/40/17 front tire so the stabilizer shock wouldn't be...
Yesterday I finished installing my PCV catch can on the truck. Today I'm just gonna cruise it around and watch all the scantily clad women folk :D
It's a huge show at Arlington airport. This will be the 20th year or something. Summer slam by sittin pretti. There's a thing in the event...
Go through my build thread and take note of my suspension mods. They are amazing frames to lower stuff on. Biggest drawback is the higher than...
Well I see a good basic plan there. Little refinement and you're set. First, I wouldnt bother with less than. 4-5" drop. Rear end takes a 3"...
Ill get better pics up soon. The gas tank curve will get eliminated from the front flare. So are the moulding bumps at the edges. I'm also gonna...
Clean find. Get it, then drop it on its balls. Ill help guide the way of the low ride :D
Ahh the 21R and its elusive info lol. The 21R is identical to a 20R but with a smaller bore. Same stroke as 20 and 22R. Same head and intake as...
That's awesome. Any noticeable weight drop? Would look clean covered in gauges and paint. :D
Looks great buddy. You bringin it to sittin pretti in two weeks?
I always figured that would work. Ill have to try that when I take my header back off. One of the header studs stripped out again. And the...
Stock mighty Max springs give about a 2" drop. 2" drop springs give about 4". They ride very similar to stock. I've had drop coils for both and...
Those tubes just fed air to the emissions crap. Cut them off flush or drill them out. I've never bothered removing mine tho lol
I figured those mount studs got reused on yours. I'm eliminating them. Thanks for the pics. I'm Joe btw.
Should be quite noticeable. Carb and header wakes any engine up. The 21r is a little gutless compared to the 20 and 22r but can run plenty strong....
Step up to a 3/8" drill, even a cheap harbor freight one. It has a lot more torque than a wimpy die grinder, especially an electric one. It won't...
Separate names with a comma.
