I'd think they fit but they will be in contact with your fenders and bed side if your dropped enough 10 inches can be done on these trucks just...
Yea machine shop . They have motor baths that get extremely hot and some pretty wicked chemicals to Basically if you have your block torn down...
For a 17x9 4.5 backspace is measured from lip to lip Offset is In between the lips so a17x9 4.5 BS is a zero offset rim 4.5 on each side of the...
Pop that valve cover off and check those valve springs . I cracked one a while back loosing partial movment of my exhaust valve and popped a head...
I did that with 3 inch blocks got pretty soft shocks helped but am going back to a full set of leafs getting to much axle wrap
Welcome .tomato got any pics
Carb as in legal certified tested and documented parts that are approved for use in emissions controlled city's or states Pretty sure lc has...
Not clear on the year but I'm pretty sure it's going to be an old model Volvo proably up to 1995 I'd start looking for the old box Volvo's or any...
O okay they can straighten those to proably easier to pull a set from another truck or just find a whole g code rear end for parts and such
I get asked all the time buy regular folks .., is that a mighty max . The trucks are practically related so yea I'd say give it a shot
My old rims were 15x7 .4.5 backspace you'll be fine they will be almost flush with the fenders with a little room to spare
Hella makes aftermarket horns small round ones like the oem ones red in color . There supposed to be louder than stock .
http://www.toyotaminis.com/forum/build-up-project-threads-19/luxus-2300/...
I can't Rember for sure ... But I believe 7.5 diff is 28 spline and 8's are 30 spline axles But there are do it yourself fixs remedies for bent...
Let me no if ya need camaro rear seat specs if u go that way
Welcome
X2 on the rear axle resting on the frame . You'll eventually bend your axle tubes from constant abuse not to mention the back shattering ride
That's crazy they bolt on dang.. Good lookin out
Na just hack off the old cat weld the new one on and go from there back all welded no leaks .. No need for removable sections unless you desire them
As far as regular and modded engine internals engnbldr.com LC engineering.com .random other engine parts external sensors and odd ball stuff...
Separate names with a comma.
