http://www.webercarbsdirect.com/v/vspfiles/images/Weber%20Trouble%20Shooting%20Guide.pdf setup the choke as described above. id also...
they will fit. got the same dimension wheels on my 75 and its lower then yours. but the 275's dont make much sence, that would look...
no the guide does not say "make all adjustments with the butterflys open" it says: (in a nut shell) 1. verify all stock settings....
figures, both pass doors are F'd.:ROFL: sweet deal, any pics of the damage?
im not so sure about the newer trucks, but on the older trucks the ebrake cable doesnt go in a very straight line, you might be able to relocate...
why do you have your mixture screw all the way lean? you need to follow the "lean best idle" procedure. then come back and let us know...
yes on everything cept.... the gold thing with the 2 white wires going to either side of it [IMG] with the water passages, you can...
ya welding it should be fine, as long as you remember that its aluminum.:D on a side note: single row T chain and plastic guides are only...
if the oil is a milkshake color, something like mocha flavor. there is water in the oil. i wouldnt drive it, or run it. depending on how...
i bet the rib under the window will keep it straight. if you only cut below the bed lip i bet you'll be fine, theres not a lot of stress on...
you can attempt to order a new axl shaft from the dealer and ask how many splines;)
sounds like you got the right mix there. but remember, these arnt high horsepower motor, or high revving either. redline is 5500 and the stock...
there are a ton of places that coolant can come from on the block, i could sit here all day and tell you to replace crap but it would do no good,...
if you want a car tranny then use one... only one thats only ever been in a car is the W58. its been in celica's, supra's, and iirc...
the brake booster line hooks up on the firewall side of the carb, on the wheel well side of the intake. if that doesnt make sence heres a pic...
i do. ive got a W50, he'd have to change out the tail shaft to get the shifter right, its from a celica. and i got a 4 speed in kit form,...
is that your almost free celica on craigs list? i have a ton of T covers
looks good:D the white walls, rings, and caps look factory, thats awesome:D please drop it now:drunk:
i get $500 for running 2xr's covered in oil pulled from a parts car, usually sell within a week. so for a clean motor, with a weber carb, no...
instead of frosting or cuts, try drilling a small hole in either end then inserting the led there. very nifty idea. on related...
Separate names with a comma.
