I thought for sure the last year for a carb was 88. :shrug::shrug: But besides a 22R carb. Theres the... Weber 32/36. very simple and gas...
I do. I have the factory service manual and its at my other house. So gimmie a day or two...
16X7's off a MK7 Lincoln LSC. 245/55ZR16. The rear snubbers bolt to the frame just above the rear axle. Yes, bump stops. I was looking for...
Ask away! Its your thread. A was a newb a year ago when I dropped the truck.............................And still is. :lol: Loosening the...
Yup. Just 3 inch PepBoys blocks. The front is rock stock in this pic, but with 3 in blocks on the rear. [IMG]
Inbetween some side jobs... Managed to squeeze bout 1/2 hour of work into the motor. Mounted the timing cover and had hell trying to find the...
Craigslist bro! Got mine for 15 bucks, AND it was drilled and tapped for a oil return for a blower...:evil: I think "fox body" headers come...
Put the engine on the floor, and took off the rear seal cover plate thingey. Cleaned it up, and the back of the engine. Replaced the rear...
The rear drop springs will work. I dont have em, I got 3 in blocks out back. I guess I could get them, but im eventually going to do a ladder...
Very little weight is over the rear axle. So any gains are to be had from the fronts being upgraded. One guy was making a kit to use 12.1...
Pull the timing cover, and get a chain set from somewhere. (not cloyes! its crap!) Rock brand is awesome. Thoroughly impressed. Get it...
Ive been ripped off 4 bills on a "rebuilt" 350 im my camaro. Started it up and it had a #8 rod knock like a mother...... But as far as yours....
Less than an hours work took a rusty pan, and made it look like this... [IMG] [IMG] The same paint as the engine bay. Kinda...
Nice work so far. Does your truck have a headlight relay. Those can cause some headaches...
Dont feel bad Nam. :lol: I think they look good on your truck. No caps? And yes, better than any Jeep meshies. Last night we did a...
My 82 handles like a go cart. 84+ suspension swap chassis tech 2 in drop spindles 24 mm bar off of a later model (think it was a v6) New...
Goodies are off to the machine shop. He said a week and a half. :looney: Oil pan and bellhousing support brackets sanded and painted....
A thousand bucks,.........A dent in the wallet. Destroying a v8 Mustang........w/ a 22R.........Priceless :lol:
Dropped off my 20R head at the machine shop. Explained to him that "stage 5" LC valves and seats actually fit in the chamber. :lol: Told him...
A series of pics today...Enjoy :nana: Stock 20R chamber. [IMG] My valves just dropped in. [IMG] [IMG] [IMG] [IMG]...
Separate names with a comma.
