Very good point. I it was me and I needed a head, id find a good used one on Craigslist. Have the deck surface checked for flatness at a machine...
You will be happy with the quality of any all aluminum style from eBay. They polish up well, or take a sanding and candy paint on the top tank...
Sounds like the inside of the ignition switch is crossing power to where it shouldn't allowing every position to be RUN mode. You could try...
Too bad I just put a built head on my truck or is scoop those parts up from ya. I'm sure some other dudes will clear you out. Good luck on the...
Sounds like you had an awesome time buddy. I ended up not going at all this year. Coming home to a few guys bailing here and a few bailing emails...
Today I used my truck to get me a new job. At an auto repair shop about half hour north of me. I really dig it. Been wanting back into that field...
Like he said, set the adjusters to zero. Flat with the base of the rocker arm where it meets the valve. Then torque the cam bearings and head...
You could deffinatly plumb fogger nozzles onto the bottom of each intake runner. Nothing to see, works as a wet system. Meaning fuel and nos...
Thought ya had a supra motor in a truck. Read it wrong. Ill check your thread again.
I saw your numbers. That was the 94 yeah? What kinda mods do you have? I hope my 20/22r carbed combo puts down bigger numbers than that. I...
What year is it? Everything looks normal to me, except the lock bolt on the upper half of the shaft is missing. Side note, is your brake master...
I always love those type of boxes. I plan to build one for my 78 so I don't have to remove the cab wall and replace it with flat sheet metal. I...
Thats a pretty large diameter driveline. Does your trans have any spacers under the back? That could cause it. I would say to take the driveline...
Looks dope so far. Keep posting updates. One look I always loved on a hardbody was using a frontier tailgate. I like that rolling bodyline off...
Today I decided to paint some stuff on my truck. I have half a quart of gloss black rustoleum brush on paint. I painted my brake booster and...
The posts that grab the wheel werent long enough. He tried rotating it, but with all my camber on a stock rim its pretty buried into the fender....
I wouldnt run that head personally. Seems too basic of an ad to be a performance brand. Engnbldr is a great place to get parts from. My pistons,...
Super clean truck dude. I like the look. If you get bored of the black, there is a bronze spray paint for wheels that works really nicely. I have...
So to clarify, you put the ignition back similar to what it was before and runs. You swapped spark plugs and it runs better. But you found an oil...
I think he meant how in that movie they way overused the nos. a small cheater plate design would work well. I wouldn't put more than a 50 shot to...
Separate names with a comma.
