Awesome. Either the upper or lower holes will work then redrill the other pair. Make sure you can close the hood before you drill ya know. And be...
Look sweet. That would make a nice setup for sure. They have big wheel well arches on the 4wd body so you've got room for a 26" tire all around...
Never run front blocks. Dearch the leaf pack, and take some of them out. Move the hangers up. Any theory that lowers a rear leaf setup (except...
Just something I'm considering. I need to tear down the old motor and see how bad it is inside. Might still snag it and strip all the little parts...
82 isn't torsion bars. It's leaf springs front and back with solid axles. IFS didn't hit til 86.
Since that year is a solid axle up front with leaf springs, it shouldn't be too hard to lower it a little bit. Can't get super low but could...
Here's the wiki for each motor. I see obvious things like bigger header and maybe a custom intake manifold helping it make more power but I...
So I got a new job this week at an auto repair shop. Did a motor pull on a 2000ish BMW with an inline 6. Did a little research it's either a 2.5l...
I haven't been out today but I did lost of freeway cruisin yesterday after work. New motor is breakin in great. Runs 75 down the freeway awesome....
Remember in one of the cheech and Chong movies he had a beat up low rider car. He had a barn door style latch from the cab to door with a fat...
Bummer man. Did it mess up the flared wheel lip on the bed too?
If you mean the edge of the bottom flat to the side part, wouldn't a flanger work better than a butt weld? Overlap with some holes to spot weld.
The ones I saw go between a 3 bolt steering wheel and column adapter hub. Moves it towards you about an inch. Check speedway motors too.
If you don't, I probably will. And if you're wondering if using a tall boy can with the ends cut of works, nope. The exhaust pulses actually crimp...
*starsky and hutch undercover voice* do it! Do iiittt!
I've seen aftermarket wheels getting cheap. Could order something with a nice lip and offset for like $150 each in 17s. Probably a bit less for...
Well it sounds like you have it all solved. Once you described the area it parks in it made perfect sense. Lots of foot traffic always leads to...
You should get some red fabric, make a piece to wrap around the tip. About a foot long. Cut it into strips most of the way down the length. Use a...
You could also do something unique and wrap the truck. The body lines would suit it well. There's all kinda of contact paper, its been a recent...
Wicked sweet dude. I think I saw a pic of your truck above your bros celica some place here. It's saved on my phone. Is the rs200 that ford...
Separate names with a comma.
