It's missing baffling. It is a tight fit. I got about half inch on each side from the leaf springs.
Access door temporarily mounted. Need to make a frame and weld the door to it. Until then self tapers it is. Also got my first dress up piece for...
Got the tank remounted. Had a break in the weather so I could get on the ground without getting drenched .Going to run new stainless fuel lines...
I dont even have a die grinder yet. I just have an milwaukee m18 grinder and 4 inch disk. 2 inch would be better because its tight. I would...
That was about the size I had to patch. Its pretty easy if you have a decent welder. You'll be in better shape if you can get your hands on a die...
You wouldn't want one on the msd anyway. Quicker coil failure may result with the stock system but you would get a hotter spark.
I would look into the msd instructions to and see what they recommend for a coil. Of course they want you to buy the blaster. But Im guessing they...
Have you checked for power at the msd box? Or eliminating it?
So thinking about security of the tank. My thoughts are to put it under the bed. I would just have a lockable access door. Just remember I have a...
Working on it. Still has alittle in the tank that is not coming out. Pulled the line from the carb as well. Just incase I forget and try to start...
Got to love people. Threw on my new drums and after did a walk around. Noticed my gas tanks cap was off. Not wanting to believe someone was...
If you haven't tackled it yet I'll tell you from my experience it wasn't as daunting after I got into it. The front is simply. I haven't worked on...
Alittle more sanding and it's done. Looks alright for a guy in the driveway and fighting the weather. [ATTACH]
Mostly done with the wheel well patch. Put way to much filler. Still need to do another layer. [ATTACH] Good thing to knock off the list.
If I can find a different spacer I can probably save some money. 60 bucks for it alone from Lce. From what they say its 3" long. But I dont know...
For the pair. They are cracked. He has a few single ones that just need finished. I spend alot of time searching for parts. I do not really get...
ebay has a few. about 550 for a new pair plus shipping from Greece. There are fiberglass ones on ebay for about 200 if I recall right. RN20 is...
Figure I would throw up the build plate. The stock color is artic white. In the engine bay it has some spots in really good shape. Spent more time...
Cleaned out the engine bay some. Also tapped the frame for the bumper bolts and got the bumper fastened again. Bolted a few other things down...
Well got it pretty much done. Still a little smoothing out but other then that turned out alright. The passenger side welded a bit better. This...
Separate names with a comma.
