One of the short takes we did of the slide karts from my buddies FB page. Video's not the greatest, but you get it......
We don't have many hills here in Central Florida. This is why I came up with the kart idea.... ;)
My buddies and I started sliding karts. I say sliding because I'm not sure it meets the definition of drifting. [IMG]
My Wilwood setup won't fit 15's. 16's, maybe.
Do you have a budget in mind?
I run Wilwood rotors and calipers. I'll get on here later and post some details. I'm at work now... :)
Washers. You need washers. Those ball joints are for a different vehicle all together, have to make them work.
It should be roughly the same height. It depends on how much of the main spring is contacting the overload. If they are extra saggy, you may...
Measure between the axle and the frame.
Oh, that's not stock. Well, the carrier bearing is, but the rear half of the driveshaft is (I think) what you see. It's from a 95 4x4 4runner...
I think that's an optical illusion. The 4wd fenders are the only choice without serious fab work. Definitely not worth it in my opinion. If I...
I'm probably going to get another turbo blanket, I cut that one in the wrong spot for the wastegate. Had to flip it over and do it again...:rolleyes:
Not that kind of Meth.... Checked a few more things off the list. Stainless exhaust all the way back... [IMG] [IMG] [IMG] Down...
I'm hoping for at least 116 hp. :D I really don't have any set goal, I plan to run about 10 psi of boost, but the engine is capable of 24 lbs....
http://www.toyotaminis.com/forum/wheels-tires-70/another-fitment-question-15590/ A lot of answers here. To get the 10" to lay out in the rear,...
There's really no telling "what" turbo that is. It's an eBay cheapo. I'll replace it with a turbonetics soon, just had it sitting on the bench...
Hoping to get it started on the 4th. What a great way to celebrate. :D
Engine is in the bay! [IMG] [IMG] Polished out the brass sensors.... Haha. [IMG] [IMG] You can't see them from this angle,...
Stock. They were on there, but hiding behind a dull finish. Stick a magnet to them, 300 series is non magnetic.
I think it's going to depend on the year. My neighbor had a rust hole in his lower U tube and the spare that I had (before I knew these were...
Separate names with a comma.
