There is tach signal at the diagnostic port. It ties to the tach wire in the harness behind the dash. You may still need a tach adapter though,...
On a stock 22r or 22re? No need. Maybe if you pulled leaves to lower it more, but I ran blocks and two leaves for a couple years and never had...
With my blower box, I cut, sectioned out pieces, and epoxied it back together. I've heard of others doing the same to different parts, would that...
Do you have pics? Of the firewall and parts you are trying to install... I modified my heater blower boxy thing, but my tubs aren't as large...
Nice! Where 'bouts are you here in CF?
You might be the first one. Do it and post up pics. The problem with the BMW's is that parts aren't cheap here in the States.
Nam, have you updated your build thread lately? The trucks looking good.
You are probably correct about that.
Possibly, but if you think about it, rain gets up there a lot, so if it were as easy as that, Toyota would have changed that design years ago.
That is most definitely exhaust leakage. It sounds like it's from one cylinder and from experience, I'd say the rear cylinder. One sure way to...
I'm considering ditching the head unit all together. You don't really need one unless you use the tuner. If you have an iPhone, you can even...
On an A43d? Do you remember exactly which springs you shimmed? I haven't found a good line drawing for the hydraulic circuits in the A43d.
NashMan, so you get around 15-16 mpg? On the trip this last weekend, it was the first time I've done any serious highway miles. I got 21mpg...
Yep. It's been an auto since it was built. And yes, I have a cooler on it. I haven't done the homework yet to see where said shims should be...
No, but that's turning the motor to 5500 rpms. I might be mistaken, but I've done it more than once. I put it in drive (overdrive off) and get...
The axle can be rebuilt anytime. They are pretty simple, although there are a few tricks out there that can be helpful. But, with any project,...
Holy Crap! That is not going to happen. :eek:
How did you design the enclosure volume and port cross sectional area and length? It looks good, hows it sound?
Look familiar? [IMG] [IMG]
That's definitely a Cando setup. Mine is identical. The notch and bridge aren't theirs though.
Separate names with a comma.
