You may have popped a fuse while changing things. Also check the battery terminals here the leads come off the clamp. I think my 78 goes from the...
Those are all pretty slick. I like the build in toolbox in the truck, and the roof top speaker/light combo on the rolla for park riding. The FJ...
One of the little tricks up front is also ditching the rubber spring pads top an bottom. I also took out my sway bar for clearance. You don't...
That looks really good. I like the dash too.
You could pull the center leaf from the spring pack. But you may not be able to get the u bolts loose, especially if the ends are damaged....
I've got 3-1/8 cut off and a few other tricks. After 2 coils expect to hammer the inner fenders unless you run tiny tires. I preferred to hammer....
I think I covered it in my build but not as a seperate mod. Or if I did it wasn't stickied or in the tech section.
You guys might be better off doing your blocks like I did. I had some DJM angled 4" cast aluminums. My axle perches are a bit narrower than their...
The suspension ideas and PS are good ideas. The bed shimming I can cover, since mine needs to be readjusted anyways. Maybe ill throw some inside...
Those will look rad on the xcab nam. Good find.
79-83 is the same spindle as 75-78 just flipped side to side to have the steering in the front not the back. Grab the brake booster and master...
The exhaust runs down the driver side on the 20/22r so routing around your gas tank might be an issue, or swap it to the other side like a 75-78.
Great looking truck. I would say a 22r is the easiest swap. Same fitment as a 20r which came standard starting in 75, so with a parts truck you...
Coming along really nice buddy! For your roof, I have an idea you may like. You might have seen the little craze here of guys wrapping their hoods...
The biggest problems with a 454 is overall width and height, and te weight. They're about 3x heavier than a 22R so you need to account for an...
Any late model parts i have I don't need. I only rock the classics now.
Or custom projects that aren't too tough, like door panels or seat swaps. I know you've done plenty of 4runner parts swap for inside and out. I...
Ill see if I still have a spare tomorrow. My old 92 had grey inside so I collected spare parts. I seem to remember seeing one in a box.
Hey my truck has like 5 coils per side :lol: And who here has ever said their t bar bolts were simple...I dunno. I've seen people fight them...
I would say if you really wanna bag it, for all the rear frame and gas tank changes to be made, some tubs and a notch cover isn't too hard to do....
Separate names with a comma.
