There are some bolt on kits ,Goggle air suspension & you should find a list of suppliers.:cool:
I suicided by doors using stock hinges & latches, also run a Locar safety lock. My doors are shaved & use Spail solenoids. This is a lot of fab...
Welcome aboard. Very clean ride.:cool:
Welcome aboard. Clean truck.:cool:
Not sure. Call a few AC shops & ask if a larger condenser as any effect on the temp.
Not sure. But there are a few Toyota specific wreckers, I'd look them & call them you may find it.
Welcome aboard. Nice truck.:cool:
Most Auto supply stores have the bushings ( not stock) & end links,which are just grade 8 bolts
A stud gun with a slide hammer would be good as no holes to weld up. Harbor Freight has them.
I replace all my AC components except the pump, which I flashed with the correct solvent & add the correct oil to change to 134A along with...
Got cut & polished put today, than polished out he whole truck. Hit a few aresas a 2nd time & wax out & should be good for this year[ATTACH]...
Replace all the hose with silicone hoses,many sources. The decal goggle search it & print out & seal it & glue in place!
I'd check for any frame damage,looks like a deep fold! If frame IS ok than I'd go with cutting out the damaged areas, you will have a hard time...
[ATTACH]
Welcome aboard. Like said above,start with the font steering & hubs, replace all front end bushings & go to ploy not rubber. Than I'd change out...
Got the base shot & 2 coats of clear shot to seal it. Blocked out & will mask out & shot the gold pearl & than 4 or more clear coats, cut & polish...
If damaged:cool: replace !!
You have to resize the photo's, I go to 50% smaller.:cool:
A lot less than a filament type bulb. Sounds like you have a short in one of the wires!
So I should be shooting the base by Tue,than the glod pearl,followed by 3 or more coats of clear
Separate names with a comma.