So Napa told me they could order one & did ,$126, it did not have the locking pin on the top. This is what hlds the cylinder inside the housing &...
Read my post on same! Assuming your compressor is good, most important thing is getting all the air out of the system before recharging!!
So my keyed ignition took a dump,will be pulling the steering wheel to remove the window washer knob & get to the body of the ignition to replace...
[ATTACH]
Well I installed the new regulators & how the drivers side goes all the way up & both are much faster!! 30 year old parts just plain wear out!...
Contact Phil at [email protected] He may be able to help.
KBS is no longer !
Part is not available, small rubber sheets Ive gotten at OSH hardware Goggle it there are many suppliers, also McMaster-Carr
That is a no go. I did take the drivers side apart, cleaned & greased, helped for a bit ,but the answer is replacement!
This is a reinforced rubber disk, there are through bolts & it s main function is to act as a damper or insulator. I plan on making one for my 88...
Yes they are!!
I am selling my 2 DDM Tuning HID kits, these are 55 watt, hi/low beam bulbs with ballast. Will fit any H4 lens like Hella.Also the rubber guards I...
So I have had a problem with my power windows running slow & the drivers side not going all the way up for some time. I had taken the drivers side...
SO I notice the light in my speedo was out, so I had to pull the cluster to check. My cluster is all custom with AutoMeter Phantom gauges & I used...
Welcome aboard!:cool:
Should be able to get at Napa Auto stores or any other auto supplier!
Welcome aboard & great truck!:cool:
Here;s my coverage https://www.streetsource.com/gallery/events/119032/haywire-18-2018
Retirement Toy came home with a Peoples Choice Award[ATTACH]
Separate names with a comma.