I think float also.Check the.little window on the side of the carb the float is right behind that.Sometimes you can bang on the top of it to free...
You do nice work my friend.
Thank you. I'm prepping for an up coming project. A virgin 92. Just trying to get everything ready.
headers Longstacks are also what the 4x4 guys look for.
Hey Joey I recently had a vibration thru my shifter. After changing my trans then con rod,thrust and main bearings I pulled of the clutch and...
Sh!t with my 4speed 411 rear end and side drafts. Forget it just park it.lol Gas over here is like $4.65 per gal.
caliper When you said robbing power I was thinking your caliper might be getting stuck.But then again it wouldn't be happening all the time. It...
check the heat sheild that covers you echaust manifold. might be loose.
It might not be the easiest but I think the best thing to do is drop the trans. I suspect it is a worn clutch plate. You have to remember on a 4x4...
cant wait to see some pics.
So its just at idle right? When gassing it it runs normal? I had that problem before but on a carbed set-up. I thought it was the carb so I kept...
figured i would probably have to just weld it up. Its already out and dry.
Like it bro. On Guam we have some giant a$$ spiders and one day on my way to work one jumped out and ran down my lap. I was at a traffic light and...
That would be the obvious solution but that's not what I was asking. This is a very common problem on Guam because we are surrounded by ocean and...
pin holes (not exactly) Here's the holes i'm talking about[img]
Sup guys. I have a few small holes in the top of the tank where the bed drains onto the tank. I have repaired a couple of other tanks before with...
This is a simple valve and valve seal test.
Try pulling your plug wires one by one with the truck running. you should hear a change in idle with each plug. Be careful not to get shocked it's...
Looks good brotha. Black out them corner lights.
fot the really thich oil build up i use easy off oven cleaner. its pretty strong so you cant leave is soaking too long. just repeat the process...
Separate names with a comma.
