No problem, I've done so much stuff wrong and blown up a whole bunch of stuff through the years so I'm happy to help when I can to keep others...
The gear from the truck should work with the supra trans. There were a few different inner gears through the years but I think those are the...
85/90 is fine. I run redline mt90 synthetic.
My welder lives in prosser at my brothers place next to his 2 post lift. Life is good. :lol: I'm sure we can work something out.
Yes exactly that. If you put the base back in place with a couple bolts and leave the mount off you'll be able to jack it up into the floor and...
Odds are it's a w55 use gl4 rated oil.
Any parts store will have the required adapters that weld in. Personally I'd start over from scratch with all 2 1/4" tube. Stock exhaust sucks....
My schedule changed so I should be available tomorrow if you need hellp.
Do yourself a huge favor and rove the shifter base from the w58 before putting it in. That little extra length makes it a biotch with the base...
They both do. The upper is a stud the lower is a bolt. They both go through the separator plate bolted to the engine. And yes, the starter needs...
Every exhaust system should be custom anyway unless you simply don't care about fitment and just want the exhaust gasses to make it out the back....
I've never ran that style but it's a good price. It will be easy to fit under the truck too.
Flowmasters sound like crap on 4 cylinders unless there is a glass pack in front of it but at that point you've already spent more then if you'd...
I haven't done a side by side comparison between the 5m vs r series throw out but I can tell you that either r series style will work perfectly....
Sure there is a reason to yank it off. I'm shaving as much weight as I can legally in my class in autocross. To the point that my first day...
Sounds like the timing may be too fast so when the mechanical advance kicks in it backfires. Or there is a clogged main jet so it goes lean when...
My W58 handle had the same glue. The black handles are just vulcanized to the bottom part so a bit of heat takes care of them handily. I don't...
There isn't a single piece of emission equipment on the truck. Just the way I like it. :D
Received the LCE header from tyrap26 yesterday and promptly hauled ass to my brothers place to install it. I'm happier than a pig in shiat with...
The stock shifter won't work in the w58. There is a 1/4" difference in the length on the bottom of the handle. You could easily heat up the...
Separate names with a comma.
