What is the diameter of that bar? I'm using an 18mm bar off of a 92ish 4runner with good results but I'm starting to look for larger bars in the...
The only thing affecting the ride quality on a lowered torsion bar suspension is the lack of travel. If you modify the bumpstops and use decent...
The torsion bars ARE the springs. They twist to provide spring action rather than bend a wire coil. There ain't a damned thing wrong or missing...
3" block and 25.5" tall tires. The post after the one I linked has a before & after pic. The before was mono leaf with spun overload and they...
The holes in the head are about 15mm deep and the threads are 10x1.25 thread.
Yup, I'm happy with them too. At first I just pulled the 3rd leaf and used the 2x4 overload in its normal orientation. I had wicked hop so I...
I have a huge stockpile of parts and pieces from projects long gone. I go to the store for filters and oil that's about it. :lol:
I should have stated that differently. Spending more than $1000 on performance upgrades for an r series is full blown nuts. If you want a...
This is gospel. Dropping more than $1000 on an r series is full blown nuts. I might have $1100 in my engine and aluminum flywheel/ceramic clutch...
Unless you're going to ditch the stock computer a turbo is an absolute waste of time and money. Even with an aftermarket computer you won't make...
Because I saved $100 by buying the slightly used long tube header from you rather than a new shorty. :lol: Shorty headers usually have a narrow...
Pull the manifold and put helicoils or better yet time serts in it yourself with the head still in place.
How much of the V6 rotor sticks out above the surface of the brake pads?
Engnbldr.Com Not the absolute best quality on the market but his parts are good and the prices are great.
It's not going to pull very hard in any gear since it has 3.07's to make up for the lack of 5th gear. A solid tuneup and checking the carb &...
Black soot sounds like the fuel pressure regulator is shot.
The lower portion probably rusted away. From the quality of craftsmanship I'm guessing an old man did the work. :lol: My build thread in the...
Well that's the last lincoln wheel I'd have chosen but it's your rig. :lol: I always use tire racks sizing tools. You can put in the stock tire...
88-95 V6 2 wheel drive will have 3.42's too. 3.07's are in 84-92ish standard cab base models with 4 speed transmissions.
Yup. Any 8" 3rd will drop in, 4 cylinder, V6 whatever it all swaps in directly.
Separate names with a comma.
