The 7.5 is better suited to sending to China to be returned to the US as matchbox cars. :lol:
So we should retrofit all old engines to have an EGR so they last longer? You give too much credit to a system that puts a bit of exhaust gas...
Slacker has it on his 88 x cab but he cheated and used the whole supra subframe.
I remove all emissions related BS because I hate fuzzy bunnies and most importantly fawk the man. :lol:
The early trucks got it with 4.10's when they had a 5 speed, the later trucks with 4 sped got them with 3.07's due to no overdrive. There are...
No problem. The 0* mark on the timing printer will coincide with the woodruff key on the crank being at dead 12 o'clock. depending on amount of...
That physically hold it to the bellhousing? M10x1.25
Correct. The 8" is standard on many 2 wheel drive trucks when the factory spec'd a certain gear ratio. I've had '76, '78, '87 and '89's with 8"...
It's a pretty bomb proof axle and there are many better options for lower gears readily available from the factory out of 4 wheel drive trucks.
If it was 84-88 the harness has to be cut and spliced. 89-95 just has to be split out of the loom and moved. Everything about the wiring of the...
I'll take vacuum leak for $500 Alex.
The guy that bought can-do specialties is a member here and they still make the arms.
I've been thinking about that exact issue lately. My initial thoughts are to reinforce the upper A arm and cut out the center for clearance and...
Did you swap the wires around going to the distributor? When I did the conversion on my 78 it wouldn't even sputter until I reversed those wires....
Oh wow I'd never heard of fake msd boxes. At least all of mine that puked were epoxy filled not hollow with an hei module screwed inside of it....
Apparently sarcasm doesn't convey over ye ol intardnets so well. He was joking in his first reply and you didn't catch it. It is what it is I...
Those numbers are for advance. It is 12 degrees, 8 degrees, 5 degrees and 0 or top dead center on the compression stroke. The second guy is right.
I've never heard of an msd box being counterfeited but I guess anything is possible. I set my ignition up using factory connectors so if an issue...
That's a fact. The trail gear kit is cheaper but the bearings are crap.
I'm currently running this module but it's coming out and going into another rig with a small block chevy V8. The module works great but the rev...
Separate names with a comma.
