Bakers gas is losing my respect. Taking there sweet ass time to do anything about shipping. Haven't even made a label. Also being avoided when...
Didnt mention everlast either. Because I wouldn't buy them.
Just a little reminder to myself. The aluminum on the radiator is 5052. Need to know to match filler metal. Actually it cant be that. Even though...
Fan is mounted. Waiting on the welder before I put it in so I can weld the mounts. I was going to use the shroud mounts and totally cut off the...
After many years of eyeing a machine I finally made the purchase. I wanted to share some of the machines that intrest me and the stuff I would put...
The few bad things about cutting springs is first you turn a mating surface into a very small point. You drastically change the profomance of the...
Got out one of the flaws I thought about leaving. Not a lot left to knock down.[ATTACH]
Well put in a few hour in on the dremel. Nearly got it all knocked down. There is a few flaws I will not worry about. The second photo is from...
Then again I have tested some switches and they showed no continuity but after I hooked it up it worked. Like my reverse light switch.
Might just want to replace the switch/sender if everything else looked good. How did you test the sender? It would need a minimum pressure to close.
Cant really expect them all to unless you're a master. Even then its hard to get right. Especially with different joints styles. I'm sure the...
Welds look pretty good. Will definitely hold up.
Pretty much in Canada. I'm out of Tacoma.
Upper left huh. What city?
Tip if you going to polish your valve cover. Dont do it. Or look for one with few flaws. Another 8 plus hours in today. Got most of the pits out...
@fred heath The water pump pulley bolt is a m6x1. I kind of remember the banjo bolt for the brakes being a 1 as well.
Separate names with a comma.
